Additional Information
Precautions
On operating voltageBefore operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.
On safety•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
•Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the power cord (mains), pull it out by the plug. Never pull the cord itself.
•Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further.
•AC power cord must be changed only at the qualified service shop.
On placement•Do not place the system in an inclined position.
•Do not place the system in locations where it is;
–Extremely hot or cold
–Dusty or dirty
–Very humid
–Subject to vibrations
–Subject to direct sunlight.
•Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc.) as staining or discoloration of the surface may result.
•Although the system heats up during operation, this is not a malfunction.
•Place the system in a location with adequate ventilation to prevent heat
•If you continuously use this system at a high volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet.
•To prevent a malfunction, do not cover the ventilation hole.
In case color irregularity is observed on nearby a TV screenWith the magnetically shielded type of speaker system, the speakers can be installed near a TV set. However, color irregularity may still be observed on the TV screen depending on the type of your TV set.
If color irregularity is observed…Turn off the TV set once, then turn it on after 15 to 30 minutes.
If color irregularity is observed again…Place the speakers farther away from the TV set.
On operation•If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly. Remove the disc and leave the system turned on for about an hour until the moisture evaporates.
•When you move the system, take out any disc.
If you have any questions or problems concerning your system, please consult your nearest Aiwa dealer.