Aiwa AWP-ZP1, AWP-ZP3, AWP-ZP5 32GB, Tuner, There is no sound, There is no sound, Optional components, The sound is distorted, Personal computer (except for AWP-ZP1)

Tuner

Severe hum or noise/stations cannot be received.

•Set the proper band and frequency (page 13).

•Connect the antenna properly (page 8).

•Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna.

•The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully.

•Keep the antennas away from the system and other components.

•Consult your nearest Aiwa dealer if the supplied AM antenna has come off the plastic stand.

•Try turning off surrounding electrical equipment.

•Set “CD POWER OFF” by CD power manage function (page 14).

A stereo FM program cannot be received in stereo.

•Press FM MODE until “MONO” disappears in the display.

Noise is heard while loading/removing a disc.

• Change the location of the AM antenna.

Personal computer (except for AWP-ZP1)

There is no sound.

•Connect the personal computer properly.

•Press PC (or FUNCTION repeatedly) to select “PC” (page 26).

•Select the standard audio device in the “Multimedia” or “Sounds and Multimedia” (for Windows 2000/Me/98 Second Edition) or “Sounds, Speech, and Audio Devices” (for Windows XP) on the Control Panel of the computer.

Optional components

There is no sound.

•Refer to General item “There is no sound.” (page 30) and check the condition of the system.

•Connect the component properly (page 28) while checking:

–if the cords are connected properly.

–if the cord plugs are firmly inserted all the way.

•Turn on the connected component.

•Refer to the operating instructions supplied with the connected component and start playing.

•Press FUNCTION repeatedly (or MD* on the unit) to select “MD” (page 29).

* AWP-ZP1 only

The sound is distorted.

•Set the volume of the connected component lower.

If the system still does not operate properly after performing the above measures, reset the system as follows:

1Disconnect the power cord.

2Reconnect the power cord.

3Press ?/1 to turn on the system.

4Hold down ?/1 and then press i-Bass on the unit for 2 seconds.

The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer.

32GB