2 Connect the FM and AM antennas.

Set up the AM loop antenna, then connect

Inserting two R6 (size AA)
batteries into the remote

it.

 

AM loop antenna

AM

LOOP

FM

Ω

75

(COAXIAL)

Extend the FM lead antenna horizontally

Note

Keep the antennas away from the speaker cords.

3For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.

Refer to the print on your system’s VOLTAGE SELECTOR for available settings.

4Connect the power cord to a wall outlet.

The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

When the remote no longer operates the system, replace both batteries with new ones.

When carrying this system

Perform the following procedures to protect the CD mechanism. Use buttons on the unit for the operation.

1Make sure that the disc is removed from the system.

2Press FUNCTION repeatedly to switch the function to CD.

3Hold down Z and then press M> until “STANDBY” appears.

After “STANDBY” disappears, then “LOCK” appears.

4Unplug the power cord.

8GB