To position the antennas FM feeder antenna:

Extend the antenna horizontally in a T-shape and fix its ends to the wall,

AM antenna:

Position to find the best reception,

To stand the AM antenna on a surface

Fix the claw to the slot,

m

●Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in SPEAKERS terminals.

●Do not leave objects generating magnetism, such as credit cards, near the speakers, as the objects may be damaged.

●Do not bring the FM antenna near metal objects or curtain rails.

●Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since

noise will be picked up.

* Do not unwind the AM antenna wire.

:.Ir

,X .** ‘:,,,W) ,# ,,1. !,,,,,:,,,,,,),,,,,,,.,,.,.,.,,,,,.,,”,

,’ . ,?,, ~’

‘ :

-

‘t

,, . ,.

.

.

.-

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is recommended.

Connect the outdoor antenna to FM 75 Q terminals.

I To connect other optional equipment+ page 18.

/

m1 8 :11 m]~~m~~~1~

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.

R6(AA)

When to retdace the batteries

The maximu”m operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

To use SHIFT on the remote control

Buttons @ have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button while pressing SHIFT,

To use FUNCTION on the remote control

FUNCTION substitutes for the function buttons (TAPE, TUNER/ BAND, VIDEO/AUX/PHONO, CD) on the main unit.

Each time FUNCTION is pressed, the next function is selected cyclically.

0

SHIFTFUNCTION

“If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte IeaKage.

●The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight.

-Other remote controls are used nearby (those of a television, etc.).

6 ENGLISH