Connect the supplied antennas,
Connect the FM an_tenna to the FM 75 Q terminals and the AM antenna to the AM LOOP terminals.
AM | FM antenna |
4 Connect the AC cord to an AC outlet.
When the AC cord is connected for the first time, the display window demonstrates the functions of the system. When the
power is turned on, the demonstration display is overridden by
the operation display. When the power is turned off, the
demonstration mode is restored.
To cancel the demonstration
Press the DEMO button.
To activate, press the DEMO button again.
To stand the AM antenna on a surface
Fix the claw to the slot.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a
AM loop antenna:
Position to find the best direction.
m
●Do not connect any speakers to the system other than the supplied ones.
●Do not leave objects generating magnetism near the speakers.
●Do not bring the FM antenna near metal objects or curtain rails.
●Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.
c Do not unwind the AM antenna wire.
PLACING THE TWO UNITS SIDE BY SIDE
You may also place the CD player and the tuner/amplifier units side by side according to your preference.
In this case, make sure that the flat cable does not obstruct the ventilation openings, as shown below.
Always leave adequate clearance between the flat cable and the ventilation openings.
\ | 7 | openings |
| Flat | cable |
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is recommended.
Connect the outdoor antenna to the FM 75 Q terminals,
I To connect other optional equipment+ | page 14. | I |
ENGLISH 5