Aiwa XR-M75 manual ENGLISH16, Press VIDEO/AUX/PHONO, Play the connected equipment

— CD DIGITAL OUT (OPTICAL)

q — ;~lD~~A~W

U!	,=	m I
d’

F{efer to the operating instructions of the connected equipment for deta,lls,

*The c:mnecting cords are not supplied. Obtain the necessary connecting cords.

@Consult your local Aiwa dealer for optional equipment.

This unit can input analog sound signals through these jacks. iJse a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRs, TV, etc.).

Connect the red plug to VIDEO/AUX/PHONO IN R jack, and the white plug to VIDEO/AUX/PHONO IN L jack,

\/Vhen connecting a turntable

Use an Aiwa turntable equipped with a built-inequalizer amplifier.

This unit can output CD digital sound signals through this jack, IJse arl optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.),

Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack.

POWER-

To play equipment connected to VIDEO/AUX/PHONO IN jacks proceed as follows.

1 Press VIDEO/AUX/PHONO.

“VIDEO”appears on the display. 0

2 Play the connected equipment.

To change a source name on the display

When VIDEO/AUX/PHONO is pressed, “VIDEO” is displayed initially. It can be changed to ‘(AUX,”“PHONO or “TV.

With the power on, press POWER while pressing VIDEO/ALIX/ PHONO.

Repeat the procedure to select one of the names.

‘When the CD DIGITAL OUT (OPTICAL) jack is not being used

Attach the supplied dust cap.

ENGLISH16