Aiwa XR-MS3 manual To change the display in playback mode, About cassette tapes, Dolby NR system

DISPLAY

SHIFT

DISPLAY

To change the display in playback mode

Press DISPLAY on the main unit, or press DISPLAY while pressing SHIFT on the remote control.

The display changes in the following order: 1 Level indicator

2Tape counter (Example: TAPE 0185)

About cassette tapes

•To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

Type II tape	Tab for
detection slot	side A

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

•120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

•Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the unit.

DOLBY NR system

The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system.

12 ENGLISH