REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and insert two R03 (size AAA) batteries.
R03 (AAA)
When to replace the batteries
The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.
To use the remote control
•Buttons on the remote control with the same names as those on the main unit can be used instead. There are operations performed by both the main unit and the remote control, but there are operations performed by the remote control only.
Read this manual for each operation and the buttons that can be used.
•Some buttons on the remote control have two different functions. To use the function on the button, simply press the button. To use the function on the plate above the button, press the button while pressing SHIFT.
SHIFT
NOTE
•The l/dbutton on the remote control has the same function as the dbutton on the main unit.
•If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.
•The remote control may not operate correctly when:
-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight
-Other remote controls are used nearby (those of a television, etc.)
6 ENGLISH
BEFORE OPERATION
zCD EJECT |
|
POWER | TUNER/BAND |
SHIFT | AUX |
TUNER/BAND 
ENTER/
ILLUMINATION 
POWER CD
PHONES 
TAPE ENTER/ILLUMINATION
To turn the unit on
Press one of the following buttons.
POWER:
The unit is turned on and enters the previously selected function mode.
TUNER/BAND:
The unit is turned on and tuned in to the previously received radio station.
CD on the remote control:
The unit is turned on and the loaded CD begins to play.
If you load a CD or press zCD EJECT to remove the CD while the power is off, the unit will turn on and the CD function will be selected automatically.
TAPE on the remote control:
The unit is turned on and the loaded tape begins to play.
Pressing AUX on the remote control also turns the unit on.
To turn the unit off
Press POWER again.
Turning on/off the illumination
The unit has two illumination lights; one around VOLUME/MULTI JOG, and the other at the CD insertion slot.
These illumination lights can be turned on in one of the three different colors.
While the power is on, press ENTER/ILLUMINATION on the main unit, or press ENTER/ILLUMINATION while pressing SHIFT on the remote control.
This turns on/off the illumination and changes its color in the following order:
1 Turns on in blue
2Turns on in orange
3 Turns on in purple
4 Turns off
NOTE
•The above operation is not possible when ENTER/ ILLUMINATION is used as the ENTER button, i.e. when setting the clock, etc.
•Turning on/off the illumination lights is not possible during the demo display or when the display brightness is set to the darker display (page 7).
Using headphones
Connect headphones with a stereo mini plug (ø3.5mm, 1/8 inch) to the PHONES jack .
No sound is heard from the speakers while the headphones are plugged in.
