AI EDIT RECORDING
4 Press the numbered buttons on the remote control to designate the tape length.
10 to 99 minutes can be specified.
f,g |
FUNCTION |
5 |
JOG MODE |
VOLUME/ |
MULTI JOG |
DOLBY NR |
DOLBY NR
4 |
| 2 |
| ||||
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
wREC/REC MUTE
Example: When using a
In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.
• fand gare also available to designate the tape length.
Tape length
The AI edit function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the track order is rearranged so that no track is cut short.
(AI: Artificial Intelligence)
NOTE
•Use Type I (normal) and Type II (high/CrO2) tapes for recording.
•AI edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.
1Load the tape, and turn Dolby NR on or off using DOLBY NR on the main unit, SHIFT and DOLBY NR on the remote control, or JOG MODE and VOLUME/MULTI JOG on the main unit. (See page
11, "PLAYING BACK A TAPE" for details.)
Load the tape with the side to be recorded on first facing upward.
2 Press CD on the remote control (or press FUNCTION on the main unit repeatedly) so that "CD" appears, and load the disc.
3Press EDIT repeatedly while pressing SHIFT on the remote control until "EDIT" lights up and "AI" flashes on the display.
16 ENGLISH
Number of programmed tracks on side A
Remaining time of side A
5Press wREC/REC MUTE to start recording.
The tape is rewound to the beginning of the side facing upward, the lead segment is played through for 10 seconds, and recording starts. When recording on the side facing upward (side A) ends, recording on the opposite side (side B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To clear the edit program
Press srepeatedly in stop mode so that "EDIT" disappears on the display.
To check the order of the programmed track numbers
Before recording, press EDIT while pressing SHIFT on the remote control to select side A or B, and press grepeatedly.
Programmed track numbers
Tape side
Track number
Program number
Time on cassette tapes and editing time
The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape’s specified recording time after editing, the display shows the extra time (without a minus sign mark), instead of the time remaining on the tape (with the minus sign mark).
NOTE
•Recording is prohibited if the erasure prevention tab on either side of the tape is broken off.
•The AI edit function cannot be used with discs containing 31 tracks or more.
