PROGRAMMED EDIT
RECORDING
6Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time | RECORDING |
cannot be programmed. | |
|
f,g |
FUNCTION |
8 |
JOG MODE |
VOLUME/ |
MULTI JOG |
DOLBY NR |
DOLBY NR
4,5 |
| 2 |
| ||||
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3,7
wREC/REC MUTE
Selected track | TAPE | |
Program number | ||
|
Total number of programmed tracks
Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.
NOTE
•The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.
•You can record up to 30 tracks by programmed edit function.
•You can set up to 30th track numbers by programmed edit function.
1Load the tape, and turn Dolby NR on or off using DOLBY NR on the main unit, SHIFT and DOLBY NR on the remote control, or JOG MODE and VOLUME/MULTI JOG on the main unit. (See page
11, "PLAYING BACK A TAPE" for details.)
Load the tape with the side to be recorded on first facing upward.
2 Press CD on the remote control (or press FUNCTION on the main unit repeatedly) so that "CD" appears, and load the disc.
3Press EDIT repeatedly while pressing SHIFT on the remote control until "EDIT" lights up and "PRGM" flashes on the display.
4Press the numbered buttons on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Example: When using a
• fand gare also available to designate the tape length.
Tape side A (side facing upward)
Maximum 
recording time for side A
5Press the numbered buttons to program a track.
Example: To select the 10th track, press the numbered buttons
+10 and 0.
Remaining time of side A
7Press EDIT repeatedly while pressing SHIFT on the remote control to select side B and program
the tracks for side B.
After confirming "B" on the display, repeat step 5.
Tape side B (opposite side)
En
8Press wREC/REC MUTE to start recording.
The tape is rewound to the beginning of the side facing upward, the lead segment is played through for 10 seconds, and recording starts. When recording on the side facing upward (side A) ends, recording on the opposite side (side B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To clear the edit program
Press srepeatedly in stop mode so that "EDIT" disappears on the display.
To check the order of the programmed track numbers
Before recording, press EDIT while pressing SHIFT on the remote control to select side A or B, and press g repeatedly.
Programmed track numbers
Tape side
Track number
Program number
To change the program of each side
Press EDIT while pressing SHIFT on the remote control to select side A or B, and press s to clear the program of the selected side. Then program tracks again.
NOTE
Recording is prohibited if the erasure prevention tab on either side of the tape is broken off.
ENGLISH 17
