Manuals / Brands / Photography / Camcorder / Akai / Photography / Camcorder

Akai RMD-V3104U 6. Controls the panel switch function

1 49

Download 49 pages, 739.51 Kb

155

MVP MANUAL

(5) Tint adjustment [TNT command]

Input : TNTd1d2d3

Explanation: Corrects the tint of the NTSC input board.

d1d2d3: Compensation value 0 to 255

TNT? : Help display

TNT :Displays the current value and moves to the sub command mode

•To execute this command, it is necessary to set the adjustment mode by AJYC. (Refer to the

AJYC command.)

•If data input is skipped, the sub command input mode is set after the data is displayed.

The sub command mode is the same as with the COL command.

•The changed value is memorized the last.

(Example) TNT Indicates the current tint value.

128

6. Controls the panel switch function

(1) To set the manual mode [MNL command]

(2) To set the remote mode [RMT command]

Input : MNL , RMT

Explanation :• Manual mode : Makes the following switch functions effective.

1Variable scan board filter on/off switch

2VBS/ Y/C select switch

3MODE switch (The RESET button is required.)

The manual mode is set at POWER ON (or RESET button).

•Remote mode : Mode in which the above switching setting are selected via the RS-232C line.

In this case, the above switch states are ignored.

The settings which can be switched by the remote mode are as follows.

•Optional RGB board FILTER ON/OFF switching

Refer to the DSY and DSN commands (RMD-V3020)

•V IN (Composite video/YC separate) switching

Refer to the CIC and YIC commands.

•V OUT output format (MODE) switching

Refer to NT, NTR, NTD commands.

(3) To select composite video input [CIC command]

Input : CIC

Explanation :• Select the composite video input of NTSC input board.

•This command is executed in the remote mode.

It is ignored in the manual mode. (Refer to the RMT command.)

(4) To select YC separation input [YIC command]

Input : YIC

Explanation :• Selects the Y/C separation input of the NTSC input board.

•This command is executed in the remote mode.

It is ignored in the manual mode. (Refer to the RMT command.)

Contents

Main Page Page Page Page Page Page Page Page Page Page Page Page CHAPTER 7. MVP MANUAL 1. INTRODUCTION 2. CONNECTION WITH MVP EXTERNAL COMPUTER 3. INSTRUCTIONS FOR USING A COMPUTER AS A TERMINAL <When the IBM-PC/AT is used> <With the PC-9800 series> <Example of a program GW-BASIC> <Communication mode settings in use of CCT98> 4. OPERATING MODES Page 5. MVP VIDEO OUTPUT MODES 6. ADJUSTMENT FUNCTIONS (1) MVP settings (2) NTSC input board setting (3) Variable scan board settings 7. PICTURE FRAME ADJUSTMENT PROCEDURES 1. Command reference (3) To set the system back to 4-screen magnification [@ command] NOTE) An input board must be added in order to display the image of the OPTION input. (Option) 2. Adjusting the picture frame (1) To perform fine adjustment of the picture frame [&G command] (2) To perform coarse adjustments of the picture frame [&P2, &Q2 commands] (3) To store the picture frame data [&W command] (4) To load the picture frame data [&L command] 3. To switch the image input [IFF command] RGB Personal computer 4. To indicate the current MVP state [SYS command] 5. To perform NTSC input board picture quality adjustment (1) To set the adjustment mode [AJYC command] (2) To exit the adjustment mode [AJN command] (3) Bright compensation [BRT command] (4) Color compensation [COL command] (5) Tint adjustment [TNT command] 6. Controls the panel switch function (1) To set the manual mode [MNL command] (2) To set the remote mode [RMT command] (3) To select composite video input [CIC command] (4) To select YC separation input [YIC command] (NOTE) With the RMD-V2550U, only standard speed input is possible. (8) Optional variable scan board adjustment mode settings [:A command] 8. DEMO PATTERN SETTINGS AND CAUTIONS 9. INSTALLING AND REMOVING BOARDS <Removal procedure> For your safety <Installation procedure> <Board layout> <Relationship between board insertion lanes and rear panel connectors> 10. RMD-V3020 COMMAND REFERENCE (1) Outline of the RMD-V3020 (2) VS board command rules 0. Symbols 1. Basic commands 2. Exceptional commands (3) Tracking adjustment [TRK command] (4) Contrast adjustment [CNT command] (5) R, G, B gain adjustment [RGN, GGN, BGN commands] (6) Brightness adjustment [BRT command] (7) B, R clamp adjustment [BLV, RLV commands] (8) Blanking window level adjustment [BLK command] (9) Horizontal, vertical direction screen display position adjustment [HPS, VPS commands] AA (10) Horizontal, vertical blanking window position adjustment [HWN, VWN commands] (11) Horizontal, vertical blanking window width adjustment [HWD, VWD commands] A A A A A A (12) Full dot number compensation [HFD command] (13) Freeze frame Y:ON N:OFF [FZY, FZN commands] (14) Vertical filter ON/OFF [DSY, DSN, DSX commands] (15) Vertical compression filter conversion rate input [LCV command] (16) Program ROM version display [VER command] (17) To indicate the current function setting [STS command] (18) To select preset model [M command] (19) Model fresh [F command] (20) Measurement data display [FRQ command] (21) Model table reference [TBL command] Note 1 Note 2 Note 4 Note 3 (22) Horizontal frequency input [HFQ command] Note 4 (23) Vertical frequency input [VFQ command] (24) Vertical full-line input [VLN command] (25) All reset [ARS command] 11. MODE 99 12. VS BOARD MODEL SELECTION 13. USING METHODS OF HFQ, VFQ, VLN 14. SELECTING THE SYNC SIGNAL