Akai RMD-V3104U (3) Bright compensation [BRT command], (4) Color compensation [COL command]

154
MVP MANUAL
(3) Bright compensation [BRT command]
Input: BRTd
Explanation: Corrects the brightness of the NTSC input board.
d : Compensation value 0 to F *
BRTd : Displays the current value and moves to the sub command mode
•To execute this command, it is necessary to set the adjustment mode by AJYC. (Refer to the
AJYC command.)
•The changed value will be memorized the last.
(Example) BRT3 Sets the bright level to 3.
*Sub command mode of BRT command
The sub command mode is set by BRT .
(Example) BRT3
*
* indicates the current value.
Input + and – at the cursor position.
Always input (CR) to end.
(4) Color compensation [COL command]
Input: COLd1d2d3
Explanation: Corrects the color of the NTSC input board.
d1d2d3: Compensation value 0 to 255
COL? : Help display
COL : Displays the current value and moves to the sub command mode
•To execute this command, it is necessary to set the adjustment mode by AJYC. (Refer to the
AJYC command.)
•If data input is skipped, the sub command input mode is set after the data is displayed.
COL sub command mode
The COL sub command mode is set by COL .
(Example) COL
***
*** indicates the current value.
Input the following sub command at the cursor position.
Always input (CR) to end.
0 to 255 : Ends the sub command mode after a number has been input.
+, – : Increases/decreases the data by one step.
UP1 to 9, 0 : Increases the current data by 1 to 10 steps.
DW1 to 9, 0 : Decreases the current data by 1 to 10 steps.
RES : Defaults the adjustment value (factory setting).
: Ends the sub command input mode.
•The changed value will be memorized the last.
(Example) COL UP0 : Increases the color compensation value by 10 steps.