ASSEMBLY

ASSEMBLY

GENERAL

The HYDRO88 & 96 will attach to most tractors with Cat l or Cat ll Hitch and 540 PTO RPM.

DEALER SET-UP INSTRUCTIONS

Assembly of this mower is the responsibility of the Alamo dealer. The mower should be delivered to the owner completely assembled, lubricated, and adjusted for normal cutting conditions.

Set up mower as received from the factory with these instructions. Open parts box and lay parts out to make location easy. Refer to the parts lists and exploded view drawings for more detail.

This mower is shipped partially assembled. Assembly will be easier if components are aligned and loosely assembled before tightening hardware.

Always use personal protection devices such as eye, ear and foot protectors during assembly.

HOSE ATTACHMENT

Attach the Pressure Hose (1) to the Hydraulic Motor. Attach the Return Hose (2) to the Wet Tube on the Mower. Attach the Case Drain Hose (3) to the Hydraulic Motor. Figure ASM-FL-0036

HYDRO 88 & 96 03/09

Assembly Section 3-2

©2009 Alamo Group Inc.

Page 78
Image 78
Alamo 96, 88 manual Assembly, General