Alamo SX15 manual Operation, Standard Equipment and Specifications

OPERATION

1.Standard Equipment and Specifications

	SX15
Horsepower Required	50 HP
Cutting Capacity (Max.)	2”
Cutting Height	1”-15”
Safety Deflector	Std.
Cutting Width	180”
Overall Length	176”
Weight (Approx.)	4281 lbs
Hitch	Clevis
Blade Carrier	Pan
Blade Tip Speed (Center, 540 RPM)	15,268 FPM
Blade Tip Speed (Wings, 540 RPM)	15,395 FPM
Gearbox Rating
Power Divider	160 HP
Center and Wings	100 HP
Output Shaft Diameter	2”
Driveline Size (Main)	Cat 5
Driveline Size (Wings)	Cat 4
Deck Thickness	10 Ga.
Side Skirt	1/4” x 9”
Jack Stand	Std.
Overall Width	187”
Blade Overlap	6”
Transport Width	96”
Wing Lift Hyd.	Std.
Wing Flex (Degrees)	90 Degrees Up - 22 Degrees Down
Replaceable Skid Shoe	Std.

*Ratings based on actual field performance.

The Mower is designed for certain mowing applications and is rated to cut up to a specific size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut vegetation above the Mower’s rated capacity or to cut any type of non- vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component damage and equipment failure resulting in possible serious injury or death. (SGM-14)

SX15 01/09 Operation Section 4-3

© 2009 Alamo Group Inc.

OPERATION