OPERATION
OPERATION
The horsepower required to operate the mower depends on several operating factors including the vegetation to be cut, terrain condition, operator experience, condition of the mower and tractor, and others. For most mowing conditions the SX15 mower requires a tractor with a minimum of 50 HP. Operating the mower with a tractor that does not have adequate power may damage the tractor engine. Exceeding 130 HP may cause mower damage by overpowering the unit in heavy cutting conditions.
3.3 Front End Weight
A minimum of 20% total tractor weight must be maintained on the tractor front end at all times. Front end weight is critical to maintain steering control and to prevent the tractor from rearing up while driving. If the front end is too light, add weight until a minimum of 20% total weight is reached on the front tires. Front weights and weight carriers can be purchased through an authorized tractor dealership.
3.4 Drawbar
The tractor drawbar must be positioned at a certain length based on the operating speed of the mower for proper driveline operation. If the mower is a 540 RPM unit, position the drawbar length from shaft end to hitch hole at 14”.
Ensure that the drawbar is rated to carry the tongue weight of the mower.
Pintle Hook
Drawbar length must be modified to obtain dimension "A" (CV Driveline = 17" ± 2").
OPS-R- 0061_F
SX15 01/09 | Operation Section |
© 2009 Alamo Group Inc.
