Alesis ALESIS M20 owner manual 8B Enable Auto Record, 8C SET Auto Punch Points on the FLY

Chapter 8, Transport Controls and Basic Recording

8.8B ENABLE AUTO RECORD

To enable and disable Auto Punch, make sure the machine is not in Edit mode (if necessary, press the Edit button so that it turns off).

Operation	You press…	You see…
Enable Auto Record	Auto Record button	Auto Record button
		lights
Disable Auto Record	Auto Record button	Auto Record button
		turns off
Use Auto Record	Press Play and Record	Record buttons light
	prior to the punch in	solid during punched
	point	region

Note: If the currently selected locate number equals the punch-in locate number, then the In label lights in the Locate Point block. Similarly, if the currently selected locate number equals the punch-out locate number, then the Out label lights in the Locate Point block.

8.8C SET AUTO PUNCH POINTS “ON THE FLY”

Whenever you punch in/out manually (as opposed to auto-record), the default auto-punch points assume the times of the manual punch points, and stores them in locations 98 and 99.

Note: This is not the case if punching is enabled/disabled with the Record Enable buttons.

ALESIS M20 REFERENCE MANUAL 1.06 8-9