FOOTSWITCH-CONTROLLED Location | Alesis ALESIS M20 specification

Autolocation, Chapter 9

9.7FOOTSWITCH-CONTROLLED LOCATION

If the transport is playing, pressing the Locate/Play footswitch locates the transport to the Auto Return locate point, then stop or enter play, depending on the setting of the Auto Play switch (section 9.3).

Pressing the Locate/Play footswitch while the tape is locating initiates stop.

Note: If the transport is stopped, pressing the Locate/Play footswitch initiates play.

9-6	ALESIS M20 REFERENCE MANUAL 1.06

Page 62

Image 62

Alesis ALESIS M20 owner manual FOOTSWITCH-CONTROLLED Location

Contents

Alesis M20 Professional 20-BIT Digital Recorder Alesis M20 Reference Manual Table of Contents Track Record Enabling and Monitoring Table of ContentsTape Formatting Digital/Analog Input Selection and Routing Midi Functions AutolocationVarispeed SMPTE, Sync, and Offset Functions Utility Menu LRC Remote Control Tutorials and Applications M20 Smpte Synchronization Overview Time Code Tutorial Maintenance and TroubleshootingUsing The M20 Data Section Of Tape M20 Hidden Functions Table of Contents Please Follow These Precautions When Using this Product Important Safety Instructions and ComplianceSafety Symbols Used in this Product Viii Instructions DE Sécurité Importantes Symboles Utilisés Dans CE ProduitSafety Notices Safety Notices ICES-003 Issue CE Declaration of Conformity M20 Highlights OVERVIEW, SETUP, and BasicsChapter Unpacking and Inspection AC Power HookupOverview, Setup and Basics, Chapter Line Conditioners and Protectors About Audio Cables USE the Right Tape BackupBasic Audio Hookup Preparing the Tape Prior to USE Avoid Electromagnetic Interference Overview, Setup and BasicsOperating Environment M20 Front Panel Control and Connector Basics About the Front Panel Control and Connector Basics, Chapter M20 Rear Panel with optional EC-1 AES/EBU Card About the Rear Panel 2G Video in and Thru 2L Power2I Midi in and OUT 2H Adat Sync in and OUT Editing M20 Operating Parameters Keypad Editing M20 Parameters, Chapter To customize the default set of names1F ENTER/NAME 1I Entering Parameter Values 1G Selecting Pages1H Selecting page Parameters Editing M20 Parameters Edit Button Editing Conventions Tape Formatting Sample Rate Selection Formatting Tape, Chapter Formatting Tape Word Length Selection1A PULL-UP and PULL-DOWN Sample Rate Selection Format a NEW Tape Record Tracks While Formatting Certify Tape Format Extend a PARTIALLY-FORMATTED TapeEND Formatting Reformatting Caution Recording a Benchmark Tape Lock OUT Formatting Safe ModeBulk Erasing Track Record Enabling and Monitoring Track Basics Record Enable Track Input EnablesAuto Input Switch Track Record Enabling and Monitoring, Chapter Safety Mode ALL Safe Monitor Inputs ALL Input Track Record Enabling and Monitoring, Chapter Input Select DIGITAL/ANALOG Input Selection and RoutingDigital Source Input Selection and Routing, Chapter Input Signal Routing Analog and DigitalTrack Output Selection 4A Analog Input Routing Input Selection and Routing If digital source = I/O Card AES/EBU 4B Digital Input RoutingIf digital source = Adat Optical If digital source = Track Copy 4C RECORD-ENABLING the Destination Tracks AUX Routing Input and Output 1A Clearing Peaks Meter Mode SelectionMetering Meter Setup Metering, Chapter Transport Controls and Basic Recording About the Tape Counter 3A Play Button and Sync Status 4A JOG ModeJOG/SHUTTLE Wheel and Search Transport Controls and Basic Recording, Chapter 4B Shuttle Mode 4C Search Button 4D Search Master Other Transport Buttons You press… If tape is If tape is moving You see… Stopped 6B Punching OUT of Record Record6A Punching Into Record How to Override Write-Protection Rehearse Mode6D Recording with a Footswitch 6C Record WRITE-PROTECTION 8A Setting Auto Record Punch Points Auto Record 8B Enable Auto Record 8C SET Auto Punch Points on the FLY Transport Controls and Basic Recording, Chapter 1A SET Locate AutolocationENTERING, SELECTING, and Editing Location Points 1B Copy Tape Location Autolocation, Chapter To select and edit location points Loop Between Start and END Locate Points Auto Return Deferred Play and RecordPLAY-AFTER-LOCATE Auto Play 4A Setting Loop Start and END Points SET PRE-ROLL SET POST-ROLL FOOTSWITCH-CONTROLLED Location Varispeed 10-1 Varispeed, Chapter 10-2 11-1 SMPTE, SYNC, and Offset FunctionsClock Source 11.3A Internal Smpte RateTime Code Source SMPTE, Sync, and Offset, Chapter 11-3 Chase ReferenceSMPTE, Sync and Offset 11.6A SET Smpte Offset Value Smpte ChaseReference Counter 11-4 11.6D Park Ahead 11.6B SET Smpte Chase Mode11.6C SET Flywheel Duration 11-5 11-6 11.7A Generator ModeInternal Generator 11-7 11.7B Time Code Start Reference11.7C ABS/START Offset Tape Offset 11-8 Hmsfsf 11-9 Track Delay 11-10 To change delay for several tracks at once 11-11 SMPTE, Sync, and Offset, Chapter 11-12 MMC Output Midi FunctionsMidi Device MTC Follow GEN Load SOFTWARE? Receive Sysex DUMP?Send SOFTWARE? Approximately 12 minutes 12-3 Midi Functions, Chapter 12-4 Online Source Utility MenuDigital OUT 13.2A Online Button ONE-BUTTON Record 13.2B Independent Slave ModeOnline Control Input Monitor Time Code Output Level Unthread TimeoutCrossfade Time REWIND/FAST Forward TC Output Mute Until Lock Search EnableLocate Before Play Dynamic Punch Load Data from TAPE? 13-5 13-6 Front Panel Software VersionSoftware Version LRC Remote Control 14-1 LRC Remote Control, Chapter 14-2 Overview Tutorials and ApplicationsTutorial 1 Multiple M20 Operation Synchronizing Machines Achieving Lock Independent Slave ModeMASTER/SLAVE Interaction Tutorials and Applications, Chapter Formatting Multiple Tapes Master Format ENABLED, Complete FormatMaster Format ENABLED, Format Extend 15-3 15-4 Master Format DisabledMaster Format DISABLED, Format Extend Tutorial 2 Making Digital Backups 15-5 15-6 Dealing with Damaged TapeMaking a 16-BIT Copy from a 20-BIT Master 15-7 Tutorial 3 Recording Digital Audio from Other SourcesDigital Clock Considerations Sample Rate VS. Pitch Control Tutorial 4 Combining M20S and AdatsM20 Transport Speed Input Monitoring Polarity Differences 15-9 Tutorial 5 Setting UP Inputs 15-10 Tutorial 6 Updating M20 Software 15-11 Tutorial 7 Using the M20 with Unbalanced Inputs and Outputs 15-12 Chapter Synchronization OverviewSynchronization Basics Master or SLAVE? 16.2B Genlocked Time Code ONE Clock Principle16.2A House Sync Smpte Synchronization Overview, Chapter 16.3B Reference Clock Reference Counters VS. Clock Sources16.3A Location Reference Smpte Synchronization Overview 16-4 16-5 Offsets in the M2016.3A Smpte Chase Offset 16-6 16.3B Internal Generator ABS Offset16.3C Tape Offset 16.4B AUTO-DETECTION of Smpte Rates Smpte Time Code Rates and Types16.4A Drop Frame 16-7 16-8 16.4D MTC Midi Time Code16.4C Vitc Vertical Interval Time Code Press Edit to leave edit mode. The blue light will turn off Time Code TutorialGenerating Time Code Onto a VCR 17-1 Press INT GEN or TC Input to stop the time code generator Synchronizing Without a T/C TrackTime Code Tutorial, Chapter 17-2 Leave Edit mode, turn on INT GEN, and arm the TC track Recording a Time Code Track17.3A Recording Smpte from ABS Time 17-3 Press Play and Record 18-5 Maintenance TroubleshootingAdat Head Cleaning Maintenance and Troubleshooting, Chapter 18.1A Head Cleaning Cassettes Optional18.1B Manual Head and Tape Path Cleaning 18-7 Adat Head Life18.2A Head Alignment 18.3B Care of Adat Tapes Tape Maintenance Safe Tape18.3A Tape Wear 18-8 18.4B Maintenance MAINTENANCE/SERVICE18.4A Exterior Cleaning 18.4C Refer ALL Servicing to Alesis 18-10 18.4D Obtaining Repair ServiceCustomers in the USA Miscellaneous Button Combinations POWER-ON Button CombinationsM20 Hidden Functions Appendix Appendix 1, M20 Hidden Functions A1-2 MA-3 Advanced FunctionsM20 Software Version Page General Data Section Convention on the M20 Using the M20 Data Section of TapeBRC ⇔ M20 Song Start / Smpte Start Offset M20 Locate Points and Smpte Offsets A2-2 Appendix 2, Using The M20 Data Section Of TapeBRC ⇔ M20 Parameter MAP Appendix 2, Using The M20 Data Section Tape A2-3 Appendix 2, Using The M20 Data Section Of Tape A2-4 M20 Transport System Error Messages A3-1 Appendix 3, M20 Transport & System Error Messages A3-2 Capstan State Transition Errors A3-3 Deck State Transition Errors A3-4 Other Errors Messages A3-5 Appendix 3, M20 Transport & System Error Messages A3-6 RS-422 Track ARM ON/OFF M20 Major Feature Update VersionRS-422 Sony 9-PINSLAVE Operation RS-422 Mapping 1-2, ODDEVN, Local M20 master and two slaves ID 1 à ID 2 à ID Storing Locate Points When ID 1 is OfflineID 1 Offline with the Cadi Remote Cadi with M20 master and two slaves Cadi à ID 1 à ID 2 à ID Special notes when operating a Cadi with ID 1 offline Tape TC Detection in Fast Wind Modes MA-4 Fixed Mode Time Code Generation TC Start REFTape TC in the Tape Counter Smpte Chase with the Stop Button Tape TC Updating When in Input ModeCard AS the Digital Source VARI-SPEED and PULL-UP/DOWN Cadi Display Changes Midi ThruNEW Utility page Order Cassette AUTO-INJECT NEW RS-422 Device ID

Autolocation, Chapter 9

9.7FOOTSWITCH-CONTROLLED LOCATION

ALESIS M20 REFERENCE MANUAL 1.06