Installation
Before You Start
Tools
For most installations, the basic tools you will need are:
1 | 2 |
3 
5 | 4 |
D818I
1Wrench
2Screwdrivers
3Level
4Teflon Tape
5Duct Tape
Figure 1
NOTE: An 8 in. (20.32 cm) coin drawer is required for coin operated MDC and NetMaster models.
Additional Security
Torx security screws are available (as optional equipment at extra cost) for securing both lower access panels to each dryer base. Order Part No. 62853.
A Torx bit, Part No. 282P4, is available (as optional equipment at extra cost) for installing the Torx security screws.
A Torx bit holder, Part No. 24161, is available (as optional equipment at extra cost) to be used with the Torx bit.
WARNING
Any disassembly requiring the use of tools must be performed by a suitably qualified service person.
W299
8 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 512685 |