Alliance Laundry Systems 512685R2 Step 6: Start Dryer, Step 5: Set Fabric Selector, Step 4: Determine Proper Dryer

Operation

Step 4: Determine Proper Dryer

The direction of the arrow indicates which dryer is being used.

DRY2224N

Figure 42

Step 5: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS/ CASUAL for permanent press, DELICATE for sensitive items or FLUFF (NO HEAT) for items that require no heat.

NOTE: Always follow manufacturer’s care label instructions.

PERM PRESS

CASUALDELICATE

NORMAL

NO HEAT

FABRIC SELECTOR

DRY2185N

Figure 43

Step 6: Start Dryer

Nonmetered Models

Rotate timer knob to desired time setting (up to

60 minutes). Press the PUSH-TO-START button.

IN USE light will come on (indicating start of cycle).

NONMETERED MODELS

DRY2101N

Figure 44

Coin Slide Models

Place coin(s) in slide and carefully push in as far as possible and then pull slide out as far as possible. After IN USE light comes on (indicating start of cycle), press the PUSH-TO-START button.

METERED MODELS

W363I

Figure 45

Remove knits when slightly damp because overdyring may cause shrinkage. Do not tumble dry knit woolens.

Should dryer stop before cycle is completed, the motor overload protector may have cycled. Refer to Maintenance section.

NOTE: This machine includes an extended tumble feature. Starting 20 minutes after a cycle ends, the cylinder will tumble for two minutes every hour without heat, up to 18 hours or until door is opened.

512685