Step 3:

Connect Drain Hose to Drain Receptacle

Remove the drain hose from its shipping position on the rear of the washer by unhooking the hose from the retainer clamp.

IMPORTANT: Drain receptacle must be capable of handling a minimum of 1-1/4 inch (32 cm) outside diameter drain hose.

Standpipe Installation:

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose and tighten strap to hold hose to standpipe. This will prevent the drain hose from dislodging from drain receptacle during use.

RETAINER

DRAIN

CLAMP

HOSE

24" to 36" (91.44 cm Recommended Height)

STANDPIPE

H097IE1A

BEADED

2" (5.08 cm) or

TIE-DOWN

1-1/2" (4 cm)

STRAP

 

D465IE1A

10

504509