Dryer Slide Extension . . .

(Coin Slide Models Only)

Remove two slide extensions, four screws and lockwashers from the accesssories bag and install the extension on the top of the coin slide.

IMPORTANT: Slide extension must be attached to top side of the coin slides to make them long enough to activate the accumulator (dryer) or timer (washer).

NOTE: This unit, as shipped from the factory, does not include the coin slides, coin drawers, lock or keys. These coin slide kits (or parts) must be ordered, at extra cost, according to the purchaser’s requirements direct from the coin kit manufacturer of your choice.

Timer Cams . . .

The dryer timers are factory equipped with a 45 minute

ELECTRIC DRYERS

timing cam. If this drying time is not suitable to your

1-53242 Cams (30 Minutes)

installation, the following cams can be found in the

1-53240 Cams (60 Minutes)

accessories bag.

GAS DRYERS

 

 

1-53242 Cams (30 Minutes)

 

A 60 minute timing cam, Part No. 53240, is available for

 

the gas dryers as optional equipment at extra cost.

Coin Slide Guards . . .

(Coin Slide Models Only)

Using serrated hex head screws from accessories bag, install coin slide guards (located in accessories bag), to front of control cabinet. See illustration.

A special security screw kit is available (as optional equipment at extra cost) for securing the two coin slide

guards and both front access panels to front of unit. Order Security Kit No. 298P3. A special driver, part number 56217, is available (as optional equipment at extra cost) for installing the special security screws.

COIN

COIN

SLIDE

SLIDE

GUARD

GUARD

 

SERRATED

SERRATED

HEX HEAD

HEX HEAD

SCREWS

SCREWS

 

 

H151IE2A

NOTE: Coin slides and coin drawers are shown for illustration only. You must obtain them locally.

504509

7