Installation

Step 3: Connect Drain Hose to Drain Receptacle

Remove the drain hose from its shipping position on the rear of the washer by unhooking the hose from the retainer clamp or by removing the shipping tape.

IMPORTANT: Drain receptacle must be capable of handling a minimum of 1-1/4 in. (3.2 cm) outside diameter drain hose.

1

SWD549N

SWD549N

1Retainer Clamp

Figure 6

Standpipe Installation

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose and tighten strap to hold hose to standpipe. This will prevent the drain hose from dislodging from drain receptacle during use.

1

24" TO 36" (61 TO 91.44 cm)

RECOMMENDED

HEIGHT

SWD550N

32

SWD550N

1Drain Hose

2Beaded Tie-Down Strap

3Standpipe 2" (5.08 cm) or 1-1/2" (4 cm)

Figure 7

10

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

800937