Alliance Laundry Systems SWD439C 16

Installation

Step 6: Connect Dryer Exhaust System

For further assistance, refer to sections on Location Requirements and Dryer Exhaust Requirements.

WARNING

A clothes dryer produces combustible lint. To reduce the risk of fire and combustion gas accumulation the dryer MUST be exhausted to the outdoors.

W116

●DO NOT use plastic or thin foil ducting.

●Locate unit so exhaust duct is as short as possible.

●Be certain old ducts are cleaned before installing your new dryer.

●Use 4 in. (10.2 cm) diameter rigid or flexible metal duct.

●The male end of each section of duct must point away from the dryer.

●Use as few elbows as possible.

●Use duct tape on all duct joints.

●Ductwork that runs through unheated areas must be insulated to help reduce condensation and lint build-up on pipe walls.

●Failure to exhaust dryer properly will void warranty.

DODON’T

SWD449N

Figure 14

NOTE: Venting materials are not supplied with the unit (obtain locally).

800937