Alliance Laundry Systems SWD439C 19

Step 10: Plug In the Washer and Dryer

Refer to sections on Electrical Requirements and connect the washer and dryer to an electrical power source.

D254I

WASHER

Plug cord into separately fused 15 Amp circuit.

D254I

Figure 19

ELECTRIC DRYER

Connect to 30 Amp circuit.

D275I

Figure 20

D254I

GAS DRYER

Plug cord into separately fused 15 Amp circuit.

D254I

Figure 21

Installation

Step 11: Check Installation

Refer to Installer Checklist on the back cover and make sure that unit is installed correctly.

Moving Unit to a New Location

To prevent damage while moving the unit, the shipping materials MUST BE reinstalled.

Reinstallation of Shipping Materials

Remove front access panel by removing two screws.

Place the shock sleeves on all four shock absorbers. Refer to Figure 22.

Insert hooked end of shipping brace into the open slot of the motor mount. Attach with bolts and lockwashers. Refer to Figure 22.

Reinstall front access panel.

2 4

H336I

1Shock Sleeves

2Motor Mount

3Bolts and Lockwashers

4Hooked End of Shipping Brace

Figure 22

Refer to step 8 for proper procedures whenever the unit is moved.

800937