Installation

1

COLD

HOT

3

2

4

TLW1976N

1Water Faucet

2Fill Hoses

3Plain Rubber Washer

4Filter Screens

Figure 4

2

1

3

WATER MIXING

VALVE

4

SWD566N

SWD566N

1Water Supply Faucets

2Cold Water Connection

3Hot Water Connection

4Water Fill Hoses

Figure 5

IMPORTANT: Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subjected to.

All hoses should be checked on a yearly basis for any visible signs of deterioration. Any hose showing the signs of deterioration listed above should be replaced immediately. All hoses should be replaced every five years.

Step 3: Connect Drain Hose to Drain Receptacle

Remove the drain hose from its shipping position on the rear of the washer by removing the shipping tape.

IMPORTANT: Drain receptacle must be capable of handling a minimum of 32 mm (1-1/4 inch) outside diameter drain hose.

1

SWD567N

1Shipping Tape

Figure 6

14

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802031