Diagnostics
Diagnostic Menu
Test |
| Alarms |
|
|
|
Machine ID
Diagnostic Menu
TMB1325R
Figure 40
The Diagnostic Menu contains Test, Alarm and Machine ID Menus. The menus contain specific diagnostic information and manufacturing data for the
machine. The 
, 
, 
and 
keypads
position the highlighted box. Press the 
keypad to select the menu choice.
Press the 
keypad while in the Diagnostic Menu to return to System Menu.
Test Menu
Diagnostics Are Disabled
Test Cycle |
| Inputs and |
| Outputs | |
|
| |
|
|
|
Test Menu
TMB1326R
Figure 41
The Test Menu provides features for manufacturing and customer service testing. The highlighted box is
moved horizontally and vertically using the 
and 
keypads. Press the 
keypad to select the menu choice.
Press the 
keypad to return to Diagnostic Menu.
The screen will display “Diagnostics Are Disabled” if the manual diagnostics have been programmed off. Diagnostic test commands via PDA and network will still function.
Test Cycle Menu
The Test Cycle Menu is used to run several test steps as well as a
The Test Cycle Menu for Test Steps
Outputs:
| DM FM FW RV | HT | EA | IR | |
|
| Intputs: |
|
| |
DR | LD AFS FCRS FCLS | CL | SL1 | SL2 IL | |
RS | DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8 | ||||
Temp:90 F | RPM:0 |
| Moisture:1% | ||
Step04: Temp Index - 50, 75
PRESS
Test Cycle
TMB1424R
Figure 42
It is similar to the Inputs/Outputs Menu except that the test step is shown at the bottom of the display and a key press prompt message is shown in the lower right
corner. Press 
to advance through the steps. Refer
to Table 3 for more details of each step. Press 
to terminate the test.
32 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 70444801 |
