Alliance Laundry Systems TMB1276C manual Introduction, Model Identification, Nameplate Location

Introduction

Model Identification

Information in this manual is applicable to these models:

		Gas		Steam/Thermal Oil			Electric
25 Pound	UA025L	UT025L	UU025L	UT025S	UU025S	UT025E	UU025E
	UA025N	UT025N	UU025N
30 Pound	UA030L	UT030L	UU030L	UT030S	UU030S	UT030E	UU030E
	UA030N	UT030N	UU030N
35 Pound	UA035L	UT035L	UU035L	UT035S	UU035S	UT035E	UU035E
	UA035N	UT035N	UU035N
50 Pound	UA050L	UT050L	UU050L	UT050S	UU050S	UT050E	UU050E
	UA050N	UT050N	UU050N	UT050T	UU050T
55 Pound	UA055L	UT055L	UU055L	Not Applicable		UT055E	UU055E
	UA055N	UT055N	UU055N
	UA075L	UT075N	UU075L	UT075S	UU075S	UB075E	UU075E
75 Pound	UA075N	UTF75L	UU075N	UT075T	UU075T	UT075E
	UT075L	UTF75N
120 Pound	UA120L	UT120L	UU120L	UT120S	UU120S	Not Applicable
	UA120N	UT120N	UU120N	UT120T	UU120T
170 Pound	UA170L	UT170L	UU170L	UT170S	UU170S	Not Applicable
	UA170N	UT170N	UU170N	UT170T	UU170T

Includes models with the following control suffixes:

UO – UniLinc OPL RU – reversing UniLinc OPL

Nameplate Location

The nameplate is located on the back of the machine and is programmed in the UniLinc Control. To access Machine ID Menu through the control:

1.Press and hold , then , then keypads at the same time.

2.Press the keypad until Diagnostic is highlighted.

3.Press the keypad.

4.Press the keypad until Machine ID is highlighted.

5.Press the keypad.

Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

Model:	UT030NUOG2K0W01
Serial #:	1107002759
Install Date:	07/01/2011
Machine Type:	30
Control SN:	11410113
Front End SW:	1
Display SW:	1
Node Number:	250

Machine ID

TMB1332R

Figure 1

4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70444801