Diagnostics
Inputs Outputs Menu
Outputs:
| DM FM FW RV | HT | EA | IR | |
|
| Intputs: |
|
| |
DR | LD AFS FCRS FCLS | CL | SL1 | SL2 IL | |
RS | DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8 | ||||
Temp:180 F RPM:25 |
| Moisture:30% | |||
Inputs Outputs | 30:29 | ||||
TMB1425R
Figure 43
When the Inputs Outputs Menu is accessed through the Diagnostic Menu, the user can manually turn on outputs. The user can scroll through the outputs using any of the arrow keys, the cursor is indicated by flashing the active output on the screen. The user must
“setup” the outputs to be turned on. The 
keypad is used to select individual outputs to be turned on or
off. After the 
keypad is pressed the control will turn the selected outputs on and display the text “RUNNING”. The outputs cannot be selected until
the 
keypad is pressed. The text “RUNNING” is no longer displayed. The screen will still show the selected outputs on the screen and the user can again
select outputs to be turned on or off. If the 
or
keypad is pressed at any time during this test, the control will turn off all outputs if the test is running or return to the previous screen if the test is not running.
If the Inputs Outputs Menu is accessed through the
Run Diagnostic Menu (pressing the 
keypad during a running cycle) the menu shows only what is turned on and off as the cycle runs. Refer to Figure 43.
Abbreviations for the Inputs and Outputs are defined in the following table:
| Inputs |
|
|
DR | Loading Door |
|
|
LD | Lint Door |
|
|
AFS | Airflow Switch |
|
|
FCRS | Fan Motor Contactor Switch |
|
|
FCLS | Fan Motor Centrifugal Switch |
|
|
CL | Cabinet High Limit |
|
|
SL1 | Store 1 High Limit |
|
|
SL2 | Store 2 High Limit |
|
|
IL | Ignition Lockout |
|
|
RS | Rotation Sensor |
|
|
DIP1 | Dip Switch 1 |
|
|
DIP2 | Dip Switch 2 |
|
|
DIP3 | Dip Switch 3 |
|
|
DIP4 | Dip Switch 4 |
|
|
DIP5 | Dip Switch 5 |
|
|
DIP6 | Dip Switch 6 |
|
|
DIP7 | Dip Switch 7 |
|
|
DIP8 | Dip Switch 8 |
|
|
Temp | Temperature |
|
|
RPM | Rotations per Minute |
|
|
Moisture | Moisture Level |
|
|
| Outputs |
|
|
DM | Damper Motor |
|
|
FM | Fan Motor |
|
|
FW | Forward Contactor |
|
|
RV | Reverse Contactor |
|
|
HT | Heater |
|
|
EA | External Alarm |
|
|
IR | Ignition Reset |
|
|
| Table 4 |
34 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 70444801 |
