Allied International Home Security System specification

Camera interfaces

390R

In1 – Pin 4

390R

In2 – Pin 11

InGND – Pin 7

Figure 26: Input Ground (InGND) (Pin no. 7 from camera I/O connector) (PIKE)

8mA In1 – Pin 4

8mA In2 – Pin 11

InGND – Pin 7

Figure 27: Input Ground (InGND) (Pin no. 7 from camera I/O connector) (STINGRAY)

Triggers

ALL CAMERAS The following note is valid for all cameras:

Note	ALL CAMERAS
	For information on inputs configured as triggers see the
	Technical Manuals.

Hardware Installation Guide V2.0.0

52

Image 52

Allied International Home Security System manual Input Ground InGND Pin no from camera I/O connector Pike

Contents

Hardware Installation Guide AVT Cameras Legal notice Allied Vision Technologies GmbH 03/2008 Contents Control and video data signals Camera interfaces Ieee 1394a port pin assignment Contacting Allied Vision Technologies Info Technical informationOrdering and commercial information AVT Modular Camera Concept Document history IntroductionManual overview Conventions used in this manual StylesRead all notes and cautions carefully Style Function Example Symbols AVT accessoriesMore information Existing applications Www For more information on accessories go to AVT softwarePackages Www AVT Technical Manuals Www For downloading the Technical Manuals go to Safety instructions General safety instructions FireWire safety instructions Changing filters safety instructionsFireWire hot-plug and screw-lock precautions Screw-lock precautions Guppy changing filters safety instructions PIKE/OSCAR changing filters safety instructions Marlin changing filters safety instructions PIKE/STINGRAY voltages PIKE/STINGRAY GOF connectorsGuppy voltages MARLIN/OSCAR voltages Dolphin voltages Safety instructions Ited warranty or cancelation of warranty Safety instructions for board level camerasTions before use Always use clean boards Board level cameras General WarningsBoard level cameras Loading Board level cameras Dirty environments AVT camera cleaning instructions WarrantyWarranty precautions General warnings Avoiding the necessity of camera cleaning Where is the impurity? Locating impurities Is it an impurity? Identifying impurities Camera type Tool to be used Description Cleaning Instructions Medical-grade sterile optical cotton Scratches Are not free from contamination Iar with cleaning a camera with this instrument AVT dealer AVT cameras installing hardware AVT SoftwarePackages Hardware conditions 1394b for different requirements FireWire cable Description K1200165Marlin / Oscar / Guppy K1200162 Overview hardware installation Installing Ieee 1394 adapter Connecting camera to PC or laptop Hot-plug precautionsDo not touch the shield of the camera cable con Camera Ieee 1394b connector copper Pin camera Connector Status LEDsCamera interfaces Hirose and 1x 1394a Hirose and 2x 1394b Hirose and 1x 1394aRear view of AVT cameras Hirose and 1394 copper Pike fiber Stingray fiber Pin Signal Cable powerIeee 1394a port pin assignment Cable GND Board level camera Ieee 1394a port pin assignment Signal PinCable shield VP Power, VCC Ieee 1394b port pin assignment PIKE, StingrayMakes it possible to control the camera and output Second camera Power PIKE/STINGRAY fiber infos and cautionsGOF transmission uses MMF multi-mode fiber at 850 nm Optical connection ok Plug clean On the GOF connectorSion Please note that optical fiber cables have a Pin Signal Direction Level Description Camera I/O pin assignment 8 pin Guppy Board level camera Guppy I/O pin assignment Camera I/O connector pin assignment 12 pin Order text Order numberK7600040 As shown below Pin Signal Use Dolphin family Oscar and Marlin family GPOutput Open emitter Pike and Stingray family Level Description Control and video data signals Technical Manuals Inputs DOLPHIN, OSCAR, MARLIN, GUPPY, PIKE, Stingray Guppy outputs are not short-circuit-proof Input schematics Pike Flux voltage from LED type 1.2 V at 20 mA Input characteristics Flux voltage OSCAR, MARLIN, Pike Cycle delay of the optical couplerFlux voltage from LED type 1.5 V at 10 mA Recommended Description Ratings Operating conditions Guppy The inputs can be connected directly to +5 ALL Cameras The following note is valid for all cameras Voltages above +30 V may damage the optical couplerRegisters see the Technical Manuals Input Ground InGND Pin no from camera I/O connector Pike Input Ground InGND Pin no from camera I/O connector Stingray Parameter Test condition Value Outputs DolphinOutVCC Resistor value See Output schematics with external resistor R Dolphin on Configuration via registers see Technical Manuals Outputs OSCAR/MARLIN Emitter current Max mA Emitter collector voltage Outputs Guppy Outputs Operating conditions Outputs Pike Output parameters Pike Voltage above +45 V may damage the optical coupler Sym Value Condition Bol00 µs Rise time 60 µs Storage 48.00 µs Outputs Stingray Output parameters Stingray ≈ 5 mA load Voltage above +30 V may damage the optical coupler78 µs Rise time 65 µs Storage 27.6 µs Firmware update Contact your local dealer Index Operating Operating systemOptical coupler 40, 42