Allied International Home Security System manual Safety instructions, General safety instructions

Safety instructions

Safety instructions

This chapter describes safety instructions/cautions valid for all AVT camera families and special safety instructions/cautions depending on the camera family/model used.

General safety instructions

Note

Note

•There are no switches or parts inside the camera that require adjustment. The guarantee becomes void upon opening the camera casing.

•If the product is disassembled, reworked or repaired by other than a recommended service person, AVT or its suppliers will take no responsibility for the subsequent performance or quality of the camera.

•The camera does not generate dangerous voltages inter- nally. However, because the IEEE 1394a and 1394b standard permit cable power distribution at voltages higher than 24 V, please note that various country- specific regulations apply.

•All color models are equipped with an optical filter to eliminate the influence of infrared light hitting the sensor. Please be advised that, as a side effect, this fil- ter reduces sensitivity in the visible spectrum. The opti- cal filter is part of the back focus ring, which is threaded into the C-Mount.

•B/w models are delivered with a sensor protection glass mounted in the back focus ring to ensure maxi- mum sensitivity. In certain applications and depending on the lighting source and optics, the use of either IR blocking or IR passing filter may be required to improve the image quality.

Hardware Installation Guide V2.0.0

11