Layer 2 Switching

51

The MAXAGE parameter sets the maximum age, in seconds, of Spanning Tree Protocol information learned over the network on any port before it is discarded. The default value is 20 seconds.

The FORWARDDELAY, MAXAGE and HELLOTIME parameters should be set according to the following formulae, as specified in IEEE Standard 802.1D:

2 x (FORWARDDELAY - 1.0 seconds) >= MAXAGE MAXAGE >= 2 x (HELLOTIME + 1.0 seconds)

To modify the parameters controlling these time intervals, use the command:

SET STP={stpnameALL} [FORWARDDELAY=4..30] [HELLOTIME=1..10] [MAXAGE=6..40] [other-parameters...]

The value of the PRIORITY parameter is used to set the writable portion of the bridge ID, i.e. the first two octets of the (8-octet long) Bridge Identifier. The remaining 6 octets of the bridge ID are given by the MAC address of the switches. The Bridge Identifier parameter is used in all configuration Spanning Tree Protocol packets transmitted by the switch. The first two octets, specified by the PRIORITY parameter, determine the switch’s priority for becoming the root bridge or a designated bridge in the network, with a lower number indicating a higher priority. In fairly simple networks, for instance those with a small number of switches in a meshed topology, it may make little difference which switch is selected to be the root bridge, and no modifications may be needed to the default PRIORITY parameter, which has a default value of 32768. In more complex networks, one or more switches are likely to be more suitable candidates for the root bridge role, for instance by virtue of being more central in the physical topology of the network. In these cases the STP PRIORITY parameters for at least one of the switches should be modified.

To change the STP priority value, use the command:

SET STP={stpnameALL} PRIORITY=0..65535

The PRIORITY parameter sets the priority of the switch to become the Root Bridge. The lower the value of the Bridge Identifier, the higher the priority. If the PRIORITY parameter is set, either by specifying the PRIORTY or DEFAULT parameters, the specified STP is initialised. Counters for the STP are not affected. The default value for PRIORITY is 32768.

To restore STP timer and priority defaults, use the command:

SET STP={stpnameALL} DEFAULT

Changing the STP PRIORITY using either of the previous commands initialises the STP, so that elections for the root bridge and designated bridges begin again, without resetting STP counters. To display general information about STPs on the switch, use the command:

SHOW STP[={stpnameALL}]

Rapier Switch Software Release 2.2.1 C613-02013-00 Rev A

Page 50 Page 52
Page 51
Image 51
Allied Telesis C613-02013-00 manual SET STP=stpnameALL PRIORITY=0..65535
Page 50 Page 52

C613-02013-00 specifications

The Allied Telesis C613-02013-00 is a versatile and powerful network switch designed to meet the demands of modern networking environments. This device is part of Allied Telesis's extensive range of networking solutions, catering to both enterprise and industrial applications. It is engineered for high performance, reliability, and ease of management, making it a suitable choice for organizations that require robust connectivity solutions.

One of the main features of the C613-02013-00 is its support for advanced Layer 2 switching capabilities. This provides businesses with the necessary tools to manage and direct network traffic efficiently. The switch includes support for VLAN (Virtual Local Area Network) technology, which allows for the segmentation of network traffic, enhancing both security and performance. With VLANs, organizations can isolate critical workloads and improve network management while ensuring that sensitive information is protected from unauthorized access.

Another key characteristic of the C613-02013-00 is its extensive support for Power over Ethernet (PoE). This feature enables the switch to deliver electrical power along with data over standard Ethernet cabling. This is particularly beneficial for powering devices such as IP cameras, wireless access points, and VoIP phones, reducing the need for additional power supply infrastructure. With PoE capabilities, the switch simplifies installation and enhances flexibility in deploying network devices.

The C613-02013-00 also boasts advanced network management features, including support for SNMP (Simple Network Management Protocol) for efficient monitoring and troubleshooting. This ensures that network administrators can maintain optimal performance and quickly address any issues that arise. Additionally, the switch supports network redundancy features like Rapid Spanning Tree Protocol (RSTP), which helps to prevent network loops and minimizes downtime.

In terms of physical characteristics, the C613-02013-00 is designed for durability and ease of deployment in various environments. Its compact form factor allows for effective space utilization in data centers and network closets. Moreover, it features a fanless design, making it suitable for deployment in noise-sensitive environments such as offices and classrooms.

In summary, the Allied Telesis C613-02013-00 is a robust network switch offering advanced features such as Layer 2 switching, PoE support, and comprehensive network management capabilities. Its design and performance make it an excellent choice for businesses seeking to enhance their network infrastructure with reliable and secure connectivity solutions.
Top Page Image Contents