Layer 2 Switching | 39 |
Figure 10: Example output from the SHOW VLAN command.
VLAN Information
Name | default |
|
|
|
Identifier | 1 |
|
|
|
Status | static |
|
|
|
Untagged ports ..... |
|
|
| |
Tagged ports | None |
|
|
|
Spanning Tree | default |
|
|
|
Trunk ports | None |
|
|
|
Mirror port | None |
|
|
|
Attachments: |
|
|
|
|
Module | Protocol | Format | Discrim | MAC address |
|
|
|
| |
GARP | Spanning tree | 802.2 | 42 | - |
| |
Name | v2 |
Identifier | 2 |
Status | dynamic |
Untagged ports ..... 2,24 | |
Tagged ports | None |
Spanning Tree | default |
Trunk ports | None |
Attachments: |
|
|
|
|
Module | Protocol | Format | Discrim | MAC address |
|
|
|
| |
GARP | Spanning tree | 802.2 | 42 | - |
Table 5: Parameters displayed in the output of the SHOW VLAN command
Parameter | Meaning |
|
|
Name | The name of the VLAN. |
|
|
Identifier | The numerical VLAN identifier of the VLAN. |
|
|
Status | The status of the VLAN, either dynamic or static. |
|
|
Untagged Ports | A list of untagged ports that belong to the VLAN. |
|
|
Tagged Ports | A list of tagged ports that belong to the VLAN. |
|
|
Spanning Tree | The name of the Spanning Tree Protocol to which the VLAN |
| belongs. |
|
|
Trunk ports | The list of switch ports which belong to trunk groups. This |
| field is displayed if any port in the VLAN also belongs to a |
| trunk group. |
|
|
Mirror port | The mirror port for the switch, or “None”. Displayed for the |
| default VLAN only. |
|
|
Attachments | This section contains information about attachments to the |
| VLAN made by other modules in the switch. |
|
|
Module | The name of the software module attached to the VLAN. |
Rapier Switch Software Release 2.2.1
