Manuals / Allied Telesis / Computer Equipment / Switch

Allied Telesis C613-02013-00 manual Event, Description, Parameters

Models: C613-02013-00

1 66

Page 59

Layer 2 Switching

Script Parameters	The trigger passes the following parameter(s) to the script:

	Argument	Description

	%1	The port number of the port which has just gone down.
Event
Event	LINKUP
Description	The port link specified by the PORT parameter has just come up.
Parameters	The following command parameter(s) must be specified in the CREATE/SET
	TRIGGER commands:

	Parameter	Description

	PORT=port	The port on which the event will activate the trigger.
Script Parameters
Script Parameters	The trigger passes the following parameter(s) to the script:

ArgumentDescription

%1	The port number of the port which has just come up.

Rapier Switch Software Release 2.2.1 C613-02013-00 Rev A

Page 59

Image 59

Allied Telesis C613-02013-00 manual Event, Description, Parameters, The port number of the port which has just come up

Contents

USER GUIDE RAPIER SWITCHAll trademarks are the property of their respective owners Rapier Switch User Guide Document Number C613-02013-00 REV AIntroduction ContentsCHAPTER 3 Operating the Switch CHAPTER 4 Layer 2 SwitchingDocumentation Roadmap CHAPTER 5 Layer 3 SwitchingChapter Why Read This User Guide?Introduction Technical support Where To Find More InformationSwitching Features What Can the Rapier Switch Do?Routing Features See “Enable AT-RPFL3Upgrade Feature Licence” on page Advanced Feature Licence AT-RPFL3UpgradeOptional Features Chapter Simple SwitchingCommand Line Interface Getting StartedLogging In Giving the Switch an IP AddressEntering Commands Enabling the GUI Enable AT-RPFL3Upgrade Feature LicenceStarting the GUI Graphical User InterfaceNavigating Using help modeConfiguring Exiting TroubleshootingChanging your password MonitoringChapter Operating the SwitchUser Privileges File SubsystemFigure 3 Example output from the SHOW FILE command Online CLI HelpSaving Configuration Entered with the GUI Configuration ScriptsEditor Saving Configuration Entered with the CLIInstall Information Figure 6 Example output from the SHOW INSTALL command OFFICER privilegeReleases and Patches into the Switch To install a compressed release Example Install Software Upgrade for Rapier SwitchSoftware Reference SNMP and MIBswhere interface is the name of an interface, such as vlan11 Chapter Layer 2 SwitchingSwitch Ports Enabling and Disabling Switch PortsParameter To display information about switch ports, use the commandFigure 8 Example output from the SHOW SWITCH PORT command Table 3 Parameters in the output of the SHOW SWITCH PORT commandParameter Autonegotiation of Port Speed and Duplex ModeLayer 2 Switching Table 3 Parameters in the output of the SHOW SWITCH PORT commandPreference Port Trunking10/100 Ethernet switch ports Table 4 Autonegotiation preferences for Ethernet portsTo display information about trunks on the switch, use the command Packet Storm Protection SET SWITCH PORT=port-listALL MIRROR=NONERXTXBOTH Port MirroringSHOW SWITCH PORT=port-list SET SWITCH MIRROR=NONEportPort security Virtual LANs A VLAN can contain a mixture of VLAN tagged and untagged ports Creating VLANs Without VLAN Tags Static and dynamic VLANsMarketing VLAN Switch Training VLAN Parameter Layer 2 SwitchingFigure 10 Example output from the SHOW VLAN command Table 5 Parameters displayed in the output of the SHOW VLAN commandVLAN Tagging VLANs to be used with VLAN tags are created and destroyed in the same way as VLANs with only untagged ports, by using the commands Figure 11 Tagged VLANs Summary of VLAN Tagging RulesThe Ingress Rules Layer 2 Switching ProcessGeneric VLAN Registration Protocol GVRP The Learning Process The Forwarding Process Layer 2 Filtering because it has been added with the LEARN parameter of the The Egress RulesSET SWITCH PORT command, or has been dynamically learned This parameter is either “static” indicating the filter is a staticPriority level Quality of ServiceFigure 13 Example output from the SHOW SWITCH QOS command Spanning Tree Port States Spanning Tree Protocol STPADD STP=stpname VLAN=vlanname2..4094 Configuring STPENABLE STP=stpnameALL DISABLE STP=stpnameALL SHOW STP PORT=port-listTo change the STP priority value, use the command Meaning Figure 14 Example output from the SHOW STP commandTable 10 Parameters in the output of the SHOW STP command ParameterForward Delay Parameter To restore default port pathcost and priority, use the commandTo display STP port information, use the command Figure 15 Example output from the SHOW STP PORT commandParameter Layer 2 SwitchingFigure 16 Example output from the SHOW STP COUNTER command Table 12 Parameters in the output of the SHOW STP COUNTER commandIGMP Snooping Interfaces to Layer 3 ProtocolsIGMP is enabled and disabled using the commands Triggers The port number of the port which has just come up EventDescription ParametersPage Chapter Layer 3 SwitchingInternet Protocol IP Routing Information Protocol RIP PIM Sparse ModeIP Multicasting Novell IPX SHOW APPLE PORT AppleTalkResource Reservation Protocol RSVP ADD APPLE PORT INTERFACE=vlan11Figure 22 Example output from the SHOW RSVP INTERFACE command The commanddisplays information about the interfaces enabled for RSVP Figure Layer 3 Switching

Event

Description

Parameters

The port number of the port which has just come up.