Allied Telesis Layer 3 Switches manual Add ip int=vlan500 ip=172.16.5.103 mask=255.255.255.0

Appendix: Configuration scripts for MAC-forced forwarding example

Edge switch 3

Edge switch 3 is connected to port 49 of edge switch 1. The configuration is similar to edge switch 1—differences are in bold:

# System configuration

set system name="Edge Switch 3"

#VLAN general configuration create vlan=Voice vid=100 private create vlan=Video vid=200 private create vlan=Data vid=300 private create vlan=Management vid=400 private create vlan=EAN_Management vid=500 private

#STP general configuration

enable stp=default

set stp=default mode=rapid

#VLAN port configuration

#unlike switch 1, ports 1, 2 and 15 are not in any VLANs add vlan=100 port=49-50 uplink frame=tagged

add vlan=200 port=49-50 uplink frame=tagged add vlan=300 port=49-50 uplink frame=tagged add vlan=400 port=49-50 uplink frame=tagged add vlan=500 port=49-50 uplink frame=tagged

#STP port configuration

set stp=default port=1-48 edgeport=yes

#DHCP Snooping configuration

#unlike switch 1, there is no maxlease setting for port 15 or static bindings enable dhcpsnooping

enable dhcpsnooping arpsecurity enable dhcpsnooping option82

set dhcpsnooping port=49 trusted=yes set dhcpsnooping port=50 trusted=yes

#IP configuration

enable ip

add ip int=vlan500 ip=172.16.5.103 mask=255.255.255.0

#MACFF configuration enable macff int=vlan100 enable macff int=vlan200 enable macff int=vlan300 enable macff int=vlan400 enable macff int=vlan500

Create A Secure Network With Allied Telesis Managed Layer 3 Switches 29