Allied Telesis Patch 89262-08 manual enable ip igmp allgroup

24 enable ip igmp allgroup Patch Release Note

Figure 1: Example output from the show ip igmp command.

IGMP Protocol

--------------------------------------------------------------------------------

Status	Enabled
Default Query Interval	125 secs
Default Timeout Interval	270 secs
Disabled All-groups ports	........ 1,5,7
Interface Name	vlan2 (DR)
IGMP Proxy	Off
Group List
Group. 238.0.1.2	Last Adv. 172.50.2.1		Refresh time 34 secs
Ports 3,11,23
Group. 224.1.1.2	Last Adv. 172.50.2.1		Refresh time 130 secs
Ports 2,11,23
All Groups	Last Adv. 172.50.1.1		Refresh time 45 secs
Ports 1#,11,23
Interface Name	vlan4	(DR)
IGMP Proxy	Off
Group List
No group memberships.

--------------------------------------------------------------------------------

Table 9: New parameter in the output of the show ip igmp command.

Parameter	Meaning
Disabled All-groups ports	A list of ports that are prevented from behaving as IGMP all-
	group ports.

Examples To show information about IGMP, use the command:

SHOW IP IGMP

See Also ENABLE IP IGMP ALLGROUP

DISABLE IP IGMP ALLGROUP

enable ip igmp allgroup

Syntax ENABLE IP IGMP ALLGROUP=[{port-listALL}]

where:

■port-listis a port number, a range of port numbers (specified as n-m), or a comma separated list of port numbers and/or ranges. Port numbers start at 1 ad end at m, where m is the highest numbered Ethernet switch port, including uplink ports.

Description This command enables the specified port(s) to behave as a multicast all-group ports.

Patch 89262-08 for Software Release 2.6.2 C613-10402-00 REV H