Allied Telesis Patch 89262-08 manual PCR Module Vrrp Level, PCR 40516 Module Dhcp Level

Patch 89262-08 For AT-8900 Series Switches 7

PCR: 40510 Module: VRRP Level: 2

A configuration generated with the create config or show config dynamic commands could under some circumstances, include a

disable vrrp = <vrrpid> command even if VRRP was enabled. This issue has been resolved.

PCR: 40516 Module: DHCP Level: 2

While initialising a range, the switch acting as a DHCP server may release a dynamic entry incorrectly. This issue has been resolved.

PCR: 40519 Module: SWI Level: 2

When the STP mode was changed, all the static arps on the ports belonging to the STP were deleted. This issue has been resolved.

PCR: 40520 Module: DVMRP Level: 2

Multicast data could not flow from PIM to DVMRP on a PIM/DVMRP border switch. This issue has been resolved.

PCR: 40522 Module: CLASSIFIER Level: 2

If a create classifier command contained the ethformat parameter, the resulting entry in a script created using the create config, or show config dynamic commands could sometimes be incorrect. This issue has been resolved.

PCR: 40530 Module: IPG Level: 2

When both Load Balancer and Firewall were configured, the very first TCP session was established after rebooting. Subsequent TCP session startup packets may have been routed out to an incorrect interface causing sessions to not be established. This issue has been resolved.

PCR: 40531 Module: VLAN Level: 2

A customer port in one nested VLAN could be set to be a core port in another nested VLAN. This issue has been resolved.

PCR: 40535 Module: SWMX Level: 2

When a particular model of SFP is fitted, and a switch reboot occurs, the switch could get locked in a reboot cycle, and never manage to finish booting. This issue has been resolved.

PCR: 40537 Module: BGP Level: 2

When the status of an interface changed, the BGP revaluation of IP routes for redistribution (via the add bgp import or add bgp network commands) was incorrect. This gave inconsistent BGP route tables depending on the order of events. This issue has been resolved.

PCR: 40538 Module: IP6, SWI Level: 2

Multicast data failed to be forwarded by PIM-SM if an MLD report was received on the switch before the corresponding multicast stream had arrived. This issue has been resolved.

Patch 89262-08 for Software Release 2.6.2 C613-10402-00 REV H