Patch 89262-08 For AT-8900 Series Switches

delete igmpsnooping routeraddress

27

set igmpsnooping routermode

Syntax SET IGMPSNOOPING ROUTERMODE= {ALLDEFAULTIPMULTICASTROUTERNONE}

Description This command sets the mode of operation for IGMP Snooping.

If ALL is specified, all reserved multicast addresses (i.e. 2240.0.1 to 224.0.0.255) are treated as router multicast addresses.

If DEFAULT is specified, the following addresses are treated as router multicast addresses:

IGMP Query: 224.0.0.1

All routers on this subnet: 224.0.0.2

DVMRP Routers: 224.0.0.4

OSPFIGP all routers: 224.0.0.5

OSPFIGP designated routers: 224.0.0.6

RIP2 routers: 224.0.0.9

All PIM routers: 224.0.0.13

All CBT routers: 224.0.0.15

If IP is specified, addresses that are treated as router multicast addresses are specified with the ADD/DELETE IGMPSNOOPING ROUTERADDRESS command. In this mode, the switch will retain previous addresses that have already been specified.

If MULTICAST is specified, the following addresses are treated as router multicast addresses:

DVMRP Routers: 224.0.0.4

All PIM routers: 224.0.0.13

If NONE is specified, no router ports are created.

delete igmpsnooping routeraddress

Syntax DELETE IGMPSNOOPING ROUTERADDRESS=ipaddr[,...]

where

ipaddr is a reserved IP multicast address in dotted decimal notation.

Description This command deletes reserved IP multicast addresses from the list of router multicast addresses. The IP address specified must be within the range

224.0.0.1to 224.0.0.255. This command is only valid if the IGMP snooping router mode is set to IP with the SET IGMPSNOOPING ROUTERMODE command.

Patch 89262-08 for Software Release 2.6.2 C613-10402-00 REV H

Page 27
Image 27
Allied Telesis Patch 89262-08 manual Set igmpsnooping routermode, Delete igmpsnooping routeraddress