Patch | show ospf | 31 |
| ||
|
|
|
|
|
|
Parameter | Option/Range | Description |
|
|
|
|
|
|
| ||
BGPLimit | 1...300 | The maximum number of BGP routes that can be imported into OSPF at a time. Once |
| ||
|
| this limit is reached, importing stops until existing routes are removed. The default |
| ||
|
| is 300. |
|
|
|
*Caps denote command shortcuts
show ospf
Syntax SHow OSPF
Description This command displays information about the general configuration of OSPF routing (Figure 3 on page 31, Table 11 on page 31). New entries for the BGP route import feature are in bold.
Figure 3: Example output from the show ospf command | ||
Router ID | 123.234.143.231 | |
OSPF module status | Enabled | |
Area border router status | Yes | |
AS border router status | Disabled | |
PTP stub network generation ..... Enabled | ||
External LSA count | 10234 | |
External LSA sum of checksums ... 1002345623 | ||
New LSAs originated | 10345 | |
New LSAs received | 34500 | |
RIP | Off | |
BGP importing: |
|
|
Enabled | Yes | |
Import filter | 301 | |
Routes imported/limit | 214 / 300 | |
Export static routes | ............ | Yes |
Dynamic interface support | None | |
Number of active areas | 10 | |
Logging | Disabled | |
Debugging | Disabled | |
AS external default route: |
| |
Status | Disabled | |
Type | 1 | |
Metric | 1 | |
Table 11: Parameters for the BGP route import feature in the output of the show ospf | ||
command. |
|
|
Parameter | Meaning |
|
BGP importing | Information about the importing of BGP routes into OSPF. | |
Enabled | Whether or not the importing of BGP routes into OSPF is | |
| enabled; one of “Yes” or “No”. | |
Import filter | The IP filter number used to filter routes before they are | |
| imported into OSPF, or “None” if no filters are used. | |
Routes imported/limit | The number of BGP routes imported into OSPF, and the | |
| maximum number of routes that can be imported at a time. | |
Patch
