20 | Patch Release Note |
Features in
Patch file details for Patch 86222-10 are listed in Table 12.
Table 12: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 295536 bytes |
|
|
Patch
PCR: 01264 | Module: SWI | Network affecting: No |
Some switch chip register settings have been optimised to improve the provision of CoS with the newer revision of switching silicon.
Features in
Patch file details for Patch
Table 13: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 295444 bytes |
|
|
Patch
PCR: 01189 | Module: STP, SWI | Network affecting: Yes |
A new feature, STP forwarding, has been added. STP forwarding can be enabled and disabled using the commands:
ENABLE SWI STPFORWARD
DISABLE SWI STPFORWARD
When STP forwarding is enabled, all STP forwarding is ignored and all
BDPUs received on a port are forwarded on all other ports.
PCR: 01242 | Module: CORE, SNMP | Network affecting: No |
The switch now delays sending link traps immediately after a restart to give the link to the trap host time to come up. A similar change has been made for the cold start trap. After a 10s delay, all interfaces which are UP have a link trap generated for them. After that, link traps are sent as normal.
PCR: 01244 | Module: SWI, CORE, IPG | Network affecting: No |
Processing invalid UDP packets caused a memory leak. This issue has been resolved. Additional debugging facilities were added.
Patch