Allied Telesis R800 Series manual PCR 02035 Module Vlan Network affecting No

Patch 86222-22 For Rapier Switches and AR800 Series Modular Switching Routers 15

Features in 86222-14

Patch file details are listed in Table 8.

Table 8: Patch file details for Patch 86222-14.

Base Software Release File	86s-222.rez
Patch Release Date	28-Feb-2002
Compressed Patch File Name	86222-14.paz
Compressed Patch File Size	335336 bytes

Patch 86222-14 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancements:

PCR: 02005 Module: IPG Network affecting: No

When telnetting to the switch, the TCP connection was reset, and when the packet was passed to IPG_Forward a fatal error occurred. This patch implements a workaround.

PCR: 02035 Module: VLAN Network affecting: No

The CREATE CONFIG command now correctly configures tagged ports belonging to VLANs not in the default STP.

PCR: 02036 Module: SWITCH Network affecting: No

A new command allows the Layer 3 aging timer to be changed:

SET SWITCH L3AGEINGTIMER=<seconds>

where seconds can be 30 - 43200. After each cycle of the ageing timer, all existing Layer 3 entries with the hit bit set will have the hit bit reset to zero, and all existing Layer 3 entries with the hit bit set to zero will be deleted.

The SHOW SWITCH command output now displays the Layer 3 ageing timer value.

PCR: 02038 Module: PING Network affecting: No

Resolution of PCR 02011 in Patch 12 sometimes caused a fatal error. This issue has been resolved.

PCR: 02039 Module: IPG Network affecting: No

The SHOW IP ROUTE FILTER command output displayed counters for 'passes' and 'include' that were the same. This issue has been resolved. Counters now increment only when a filter is active and do not count interface routes.

PCR: 02040 Module: SWI Network affecting: No

PCR 02019 permitted the reception of packets by the CPU that should have been discarded. This issue has been resolved.

PCR: 02057 Module: FIREWALL Network affecting: No

Firewall TCP timeout values have been reduced for sessions placed in the CLOSED state after receiving a TCP/RESET. This applies to the stateful inspection of firewall sessions only, and not to the TCP module. Previously, PCR 01263 reduced the timeout value for sessions placed in the CLOSED state after a TCP/FIN packet was received.

Patch 86222-22 for Software Release 2.2.2 C613-10319-00 REV U