Allied Telesis X600-24TS, x600-48Ts, x600-24Ts/XP, X600-48TS/XP manual Introduction

Chapter 1: Overview

Introduction

The x600 Series Switches are managed Gigabit Ethernet switches that acts as standalone units. There are four Basic Layer 3 switches in the series:

ˆx600-24Ts Switch

ˆx600-24Ts/XP Switch

ˆx600-48Ts Switch

ˆx600-48Ts/XP Switch

The x600-24Ts and the x600-24Ts/XP switches both have 24 10/100/1000Base-T ports. The x600-48Ts and the x600-48Ts/XP switches both have 44 10/100/1000 Base-T ports.

All four switches have four SFP transceiver slots, an Secure Digital (SD) card slot, a console port, and a redundant power supply connector. In addition, the x600-24Ts/XP and the x600-48Ts/XP switches have two XFP transceiver slots.

On the back of all the switches there is an AC power connector, an RPS connector, and an expansion slot. You can connect the RPS connector to the AT-RPS3204 Redundant Power Supply. The x600 switches are shipped with a blank expansion slot with the exception of the The x600- 48Ts/XP switch which is shipped with an AT-LBM (Link Back Mode) Module installed in the expansion slot.

The AlliedWare PlusTM Operating System Software runs on all the x600 switches.

For more detailed information about the switches, including illustrations, see “Switch Descriptions” on page 15.

14