Chapter 2: Installing the Hardware

Unpacking a Switch

To unpack a switch, perform the following procedure:

1. Remove all components from the shipping packages.

Note

Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

2.Place the switch on a level, secure surface.

3.Make sure the following components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

ˆOne x600 Series Layer 3 Gigabit Ethernet Switch

ˆTwo rack-mount brackets

ˆEight flathead Phillips rack-mount bracket screws

ˆAC power cord (Americas, Australia, EU, Japan, and UK only)

ˆAC power cord retaining clip

ˆManagement cable for local management

38

Page 38
Image 38
Allied Telesis X600-24TS, x600-48Ts, x600-24Ts/XP, X600-48TS/XP manual Unpacking a Switch