English
Radio Operation
1 
Manual Storing of Station Presets
1
RDS | 1 | PTY | 2 | P.PTY | 3 |
M.I.X. | 4 | RPT | 5 | SCAN | 6 |
1.Select the radio band and tune in a desired radio station you wish to store in the preset memory.
2.Make sure that the Function indicator illuminates, and press and hold any one of the preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.
3.Press the preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds).
The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle (9) and station frequency memorized.
4.Repeat the procedure to store up to 5 other stations onto the same band.
To use this procedure for other bands, simply select the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM 3, MW and LW.).
Note: If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.
36
