6-EN
MUTE DN g
Basic Operation
Changing Backlighting Colour
1Press and hold the INTLZ button for at least 2
seconds.
2Press the f UP button repeatedly to select
"AMBER".
Each press of the f UP button changes the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3Press the TUNE button to toggle the mode
between AMBER ON (amber) and AMBER OFF
(green).
4Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you
feel the unit's backlighting is too bright at night.
1Press and hold the INTLZ button for at least 2
seconds.
2Press the f UP button repeatedly to select
"DIM (DIMMER)".
Each press of the f UP button scrolls the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3Press the TUNE button to select the Dimmer mode.
Each press toggles between DIMMER AUTO
and DIMMER MANU.
4Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
TUNE f UP
INTLZ
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
1Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the
audio back to its previous level
Demonstration
This unit has the Demonstration feature which
simulates the display functions.
1Press and hold the INTLZ button for at least 2
seconds.
2Press the f UP button to select the DEMO
mode. Each press changes the modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3Press the TUNE button to turn on or off the
DEMO mode.
Each press toggles between DEMO ON and
DEMO OFF.
If no buttons are pressed 30 seconds after the
DEMO mode is turned ON, "DEMO" blinks 3
times in the display. The DEMO mode then
begins.
NOTE
The initial setting at the factory is "DEMO OFF."
4Press and hold the INTLZ button for at least 2
seconds again to return to normal operation.
MODE
Audio Control
→ FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←
→ FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←
→ FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←