CD Player Operation
INTLZ
Opening and Closing the Movable display
1 Press the c button.
The movable display will open.
To close the movable display, press the c button again.
The movable display will close.
NOTES
•Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.
•The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.
•The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.
Digital Output On and Off
If an optional Digital Phase Processor with the optic digital connector is
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select "D- OUT".
Each press of the f UP button scrolls the modes as shown:
F3 F4 F5 c
→
NOTE
If you press the DN g button the display scrolls in reverse sequence.
3 Press the TUNE button to select the
4 Press and hold the INTLZ button for at least 2 seconds to activate the normal mode.
Playback
1 Press the c button.
The movable display will open.
Insert a disc with the label side facing up.
2 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically. The movable display will close and playback will begin.
When a disc is already inserted, press the SOURCE button to switch to the CD mode. The mode will change every time the button is pressed.
→TUNER → CD → CD CHANGER∗
(∗ Only when the CD changer is connected)
3 To pause playback, press the
