Adjusting the built-in Audio Processor
You can change High Pass Filter, Low Pass Filter, and Sub Woofer Phase on this unit, so that you can create your favorite sound effects.
1 Press and hold the A. PROC button for at least 3 seconds to enter Adjust Mode.
2 Within 5 seconds, press the DN g or f UP button repeatedly to select the desired parameter.
→ HPF → LPF∗ →
∗When the subwoofer is turned OFF by using this unit, LPF and phase are deactivated.
3 Rotate the Audio Control knob to select the desired setting.
1.HPF (Setting the High Pass Filter):
→OFF ←→ 63Hz ←→ 80Hz ←→ 100Hz ←
→200Hz ←→ 160Hz ←→ 125Hz ← Outputs all frequencies higher than that selected according to your preference.
2.LPF (Setting the Low Pass Filter):
→OFF ←→ 63Hz ←→ 80Hz ←→ 100Hz ←
→200Hz ←→ 160Hz ←→ 125Hz ← Outputs all frequencies lower than that selected according to your preference.
(Only available when using the subwoofer output from this unit.)
3.
NORMAL ↔ REVERS
You can change the subwoofer phase.
(Only available when using the subwoofer output from this unit.)
NOTES
•If the battery is disconnected, all settings return to factory default.
•If no buttons are pressed within 5 seconds, the setup menu returns to the normal audio display.
Selecting DHE Mode
Using digital signal processing technology, DHE (Digital Harmonics Enhancer) operates on harmonic components which determine tone and coloration of the musical instruments. The process operates independently on individual frequency bands, so each instrument or vocal will be distinct. Play back clarity is enhanced to compensate for road noises which would normally detract from the listener's enjoyment.
1 Press and hold the DHE button for at least 2 seconds to switch to the DHE mode.
2 Press the Preset buttons (F1 through F6) within 10 seconds to select the desired mode.
F1: OFF (NON EFFECT)
F2: Beat MAX (DHE1)
Strong Low Frequency emphasis.
F3: Lyric MAX (DHE2)
Strong vocal emphasis.
F4: Beat MIX (DHE3)
Good balance between bass and vocals.
F5: Lyric MIX (DHE4)
Slight vocal emphasis.
F6: Phase MIX (DHE5)
Enlivens any genre.
3 Press the F button within 10 seconds to select the desired mode.
→ POWER mode → FINE mode
PWR – FINE mode ←
POWER mode:
Any of the DHE effects can be modified using the Power Mode. Enhanced bass and high frequencies will be added to the selected DHE effect.
FINE mode:
Selecting the DHE fine mode will emphasize the vocal/chorus sustain for clear sound reproduction.
PWR – FINE mode:
Both the POWER mode and the FINE mode will be activated simultaneously.
