Alpine CDA-7969R owner manual Automatic Memory of Station Presets, 13-EN

1

Select the radio band and tune in a desired radio station you wish to store in the preset memory.

→ FM1 → FM2 → FM3 → MW → LW

2 Press the F button. The FUNC indicator will illuminate.

3 Press the F5 (TRVS) button to activate the Travel Search mode. The unit will automatically search and store up to 12 stations (max.) receivable in the region you are travelling.

4 To recall a station stored, press the DN g or f UP button.

To deactivate the Travel Search mode, press the F5 button.

5 Press the F button to activate the normal mode. The FUNC indicator will turn off.

NOTES

• If no stations are stored, the display shows "NO MEMORY."

• When the radio band is changed, the stations stored in memory using this function will be erased.

• Operate the unit while the FUNC indicator is illuminated.

If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.

Press the BAND button repeatedly until the desired radio band is displayed.

Each press changes the radio bands as follows:

2 Press the BAND button repeatedly until the desired band is displayed.

3 Press the station Preset button that has your desired radio station in memory.

The display shows the band, preset number with a triangle and frequency of the station selected.

Auto Station Search While Travelling

This function will automatically search for up to 12 stations receivable in the region you are in and store them in temporary memory.

Use this function when you are travelling in a region away from home.

Tuning to Preset Stations

1 Press the SOURCE button to select the radio mode.

Manual Storing of Station Presets

1

2 Press and hold any one of the Preset buttons (F1 through F6) for at least 2 seconds until the station frequency on the display blinks.

3 Press the Preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds).

The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle (9) and station frequency memorized.

4 Repeat the procedure to store up to 5 other stations onto the same band.

To use this procedure for other bands, simply select the band desired and repeat the procedure.

A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW).

NOTE

If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

Automatic Memory of Station Presets

1 Press the SOURCE button to select the radio mode.

2 Press the BAND button repeatedly until the desired radio band is displayed.

3 Press and hold the A. ME button for at least 2 seconds.

The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets F1 to F6 buttons in order of signal strength.

When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1.

NOTE

If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

13-EN