Adjusting and Storing the Time Correction
Before performing the following procedures, refer to "About Time Correction" (page 17).
1 Press and hold MENU for at least 2 seconds.
2 Press MENU to select Bass Focus mode or Time Correction mode.
3 Press gor fto make time corrections.
Each press changes the mode as follows:
Bass Focus mode ↔ Time Correction mode
4 Press BAND/TEL. to select a speaker to be adjusted.
F – L → F – R → R – L → R – R → SW – L → SW – R → F – L
Front – L → Front – R → Rear – L → Rear – R → SUBW – L → SUBW – R → Front – L
5 Turn the Rotary encoder to adjust the desired time correction value.
To store the adjusted contents
1)Press and hold, for at least 2 seconds, any one of the preset button (1 through 6) into which you wish to store the adjusted contents.
6 Repeat step 4 and 5 to set another speaker.
7 Press the Rotary encoder to confirm the adjusted contents.
The adjusted contents are not stored if the Rotary encoder is not pressed.
8 After setting, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
•If no operation is performed in 15 seconds, the unit returns to normal mode.
Recalling the Stored Time Correction Settings
1 Press and hold MENU for at least 2 seconds.
2 Press MENU to select Bass Focus mode or Time Correction mode.
3 Press gor fto make time corrections.
Each press changes the mode as follows:
Bass Focus mode ↔ Time Correction mode
4 Press the preset buttons (1 through 6) that has your desired time correction in memory.
5 Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
• Time Correction mode is automatically canceled if no operation is
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise.
1 Press MX to select MX ON.
2 Press SOURCE/POWER to select the source to which you want to apply MX (Media Xpander).
3 Press and hold MX for at least 2 seconds to activate the level setting mode.
4 Turn the Rotary encoder to select your preferred level or OFF.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and produces well balanced sound at all frequencies.
CD /WAV (MX level 1 to 3):
CD mode processes a large amount of data during playback. MX takes advantage of this large data quantity to reproduce a more clear, clean output.
MP3/WMA/XM (MX level 1 to 3):
This corrects information that was lost at the time of compression. This reproduces a
DVD (Video CD) (MOVIE MX level 1 to 2):
The dialog portion of a video is reproduced more clearly.
(MUSIC MX level 1):
A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (MP3, MUSIC, or MOVIE) that corresponds to the media connected.
If two external devices are connected, a different MX mode for each media can be selected.
5 Press Rotary encoder to return to normal mode.
•To cancel MX mode for all music sources, press MX to turn MX off.
•MX mode is automatically canceled if no buttons are pressed within 15 seconds.
•Each music source, such as FM radio, CD, and MP3/WMA can have its own MX setting.
•On disks with both MP3/WMA and
•Setting to MX OFF sets MX mode of each music source to OFF.
•This function is inoperable when DEFEAT is set to ON.
•There is no MX mode for AM radio.
•If an audio processor with the MX function
performed within 15 seconds.
