Alpine CDA-9833 owner manual Setup, Sound Customizing, 25-EN

SETUP

You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from Sound Customizing, Visual Customizing, etc., to select your desired setting.

SOURCE/ BAND/	Rotary encoder
POWER TEL.

gMENU f

The common operation for SETUP is step 1 to 4 as follows. See down below for further information about each SETUP menu.

1 Press MENU to select the SETUP mode.

SETUP mode is activated.

2 Press gor fto select the desired SETUP menu.

(e.g. Select BEEP)

Here is the explanation for CDA-9835 display example.

CLOCK*1 ↔ FM TUNER SET ↔ DIMMER ↔ SUBWOOFER (ON/OFF) ↔ SUBWOOFER (STEREO/MONO) ↔ PLAY MODE

↔BEEP ↔ SCROLL ↔ INT MUTE ↔ INT AUDIO ↔ AUX IN

↔(AUX NAME)*2 ↔ POWER-IC ↔ LCD CONTRAST*3 ↔ FONT SELECT*3 ↔ TUNER AREA*4 ↔ TW SETUP*5 ↔ A-LINK TEMP*6 ↔ BGV SELECT*7 ↔ OPENING MSG.*7 ↔ CALENDAR*7 ↔ DEMO ↔ CLOCK*1

*1 For the CDA-9835 model, refer to “Setting the Time and Calendar (CDA-9835 only)” (page 6). For the CDA-9833 model, refer to “Setting Time (CDA-9833 only)” (page 6).

*2 Displayed only when AUX is ON. *3 CDA-9833 only.

*4 Refer to “Radio” (page 8).

*5 Displayed only when the 2WAY/3WAY switch (pages 40 to 42) is set to 3WAY. This function cannot be selected when an external audio processor is connected.

*6 Displayed only when an external amplifier is connected. *7 CDA-9835 only.

3 Turn the Rotary encoder to change the setting.

(e.g. Select BEEP ON or BEEP OFF.)

4 Press MENU to select RETURN.

The display returns to normal mode.

Pressing and holding MENU for at least 2 seconds will return to normal mode.

•For the XM Radio settings, refer to “XM Radio (Optional)” (pages 27 to 29), and for the MobileHub™Link settings, refer to “MobileHub™Link Operation (Optional)” (pages 30,31).

Sound Customizing

Switching the Tuner Mode

NORMAL (Initial setting) / HI-FI / STABLE

This unit incorporates the MAX TUNE SQ for the highest quality tuner audio. Moreover, you can choose between three settings to suit your own personal sound preferences and usage.

NORMAL: Standard setting

HI-FI: Sound quality priority setting

STABLE: Noiseless priority setting

•If you find the sound is very noisy while listening to the tuner in Hi- Fi mode, we recommend you change to Normal mode.

Subwoofer On and Off

SUBWOOFER ON (Initial setting) / SUBWOOFER OFF

When the subwoofer is on, perform the steps below to adjust the subwoofer output phase and level.

1Press the Rotary encoder repeatedly to select the SUBWOOFER mode.

SUBWOOFER → BALANCE → FADER → DEFEAT → VOLUME → SUBWOOFER

•If you set the 2WAY/3WAY switch (pages 40 to 42) to 3WAY, you cannot adjust the FADER mode.

2Press gor f.

The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or SUBWOOFER REVERS (180°).

To adjust the level, turn the Rotary encoder.

Setting the Subwoofer Output

STEREO (Initial setting) / MONO

You can set the subwoofer output to stereo or monaural. Make sure to set the correct output for your subwoofer type.

STEREO: Subwoofer stereo (L/R) output

MONO: Subwoofer monaural output

Setting the Response Slope for the High

Range Speaker (TW SETUP)

MAKER’S (Initial setting) / USER’S

Depending on the response characteristics of the speaker, care should be taken when setting the response slope of the high range speaker to FLAT in 3-way mode (see “Adjusting and Storing the Crossover Settings” on page 16), as speaker damage may result.

MAKER’S: As protection from possible speaker damage, FLAT cannot be set for the response slope of the high range speaker in 3-way mode.

USER’S: The FLAT setting is possible in 3-way mode.

•A message is displayed when the response slope for the high range speaker is set to FLAT in 3-way mode.

Sound (Beep) Guide Function

BEEP ON (Initial setting) / BEEP OFF

This function will give audible feedback with varying tones depending upon the button pressed.

25-EN