Displaying the External Amplifier Information
When an external Amplifier Link compatible amplifier is connected, the external amplifier's information (voltage, electric current, temperature) can be shown in the display of the head unit.
1 Press TITLE 
in the Radio or CD mode to switch the display of the external amplifier information.
•For switching the display, refer to the section "Displaying the Title/ Text" (page 20).
•For changing the XM display, refer to the section "Changing the Display" (page 29).
Electric current
Display | Voltage Display |
AMPERE:2.9A VOLTAGE:10.1V
•The temperature display is indicated for animation display pattern1 and animation display pattern2 in the section "Switching the Display modes" (page 7).
Electric current
Voltage Display Display
12.4V 25.6A
75.0°F
Temperature Display
•To switch the display between Celsius and Fahrenheit, refer to page 27.
Setting the Multicolor Illumination
You can change the lighting color of the unit.
1 Press MENU to select Illumination.
2 Press gor fto select your desired color.
BLUE ↔ GREEN ↔ AMBER ↔ RED ↔ (USER'S*) ↔ BLUE
*You can use your desired colors as shown below if you have already registered to USER'S.
If you want to use colors other than the above
3 Turn the Rotary encoder to select colors (1 through 512).
Each press of BAND advances the color number by 30.
1 | 19 | .............. .............. .............. | 512 | ||
| 184 | 363 | |||
(Red) | (Amber) | (Green) | (Blue) |
| |
To store the setting contents
1)Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) .
The setting contents are stored.
To recall the stored color setting
1)While setting the mode, press any one of the preset buttons (1 through 6).
The stored setting contents are recalled.
4 When the setting has been completed, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
•"No Memory" is displayed if a preset that has not been stored is recalled.
Changing the Lighting Color of All the Buttons
You can change the lighting color of the unit.
1 Press MENU to select Illumination.
2 Press SOURCE/POWER.
The lighting color of all the buttons are changed. AMBER ON ↔ AMBER OFF(green)
3 When the setting has been completed, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
•SOURCE/POWER, BAND/TEL, gand fbuttons are changed to that which you have set above in "Setting the Multicolor Illumination" (this page).
Verifying the Software Version
Current version software can be verified in the display.
1 Press and hold MENU for at least 2 seconds.
2 Press MENU to select Information.
The version is displayed.
3 Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will return to normal mode.
